The AirTAC GC20006LC2G AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LC2G is a three-piece AirTAC GC-series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This configuration is size GC200 with a G1/8 port, a 40 um filter element with differential-pressure drain, a low-pressure type regulator, a round pressure gauge reading in psi, and a mounting bracket included. The bowls on the filter and lubricator are polycarbonate (PC), and the unit handles compressed air at up to 1.0 MPa (145 psi) inlet in a -5 to 70 C (non-freezing) environment.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of port, drain type, filter grade (40 um standard, 5 um optional), gauge style and scale, thread (PT standard, with G and NPT as order options) and bracket. Flow figures are published as curves rather than a single rating, so we confirm the datasheet and sizing on request.
| Model | GC20006LC2G AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic cylinders and grippers on a carton-forming and sealing conveyor, with the 40 um element and differential-pressure drain keeping condensate and debris out of the valve bank.
Installed at the air drop of a CNC machining cell to condition the supply for tool-change cylinders and clamping fixtures, with the low-pressure regulator set to the circuit's working pressure and the psi gauge giving a local reading.
Mounted on the service drop of a manual assembly bench so impact drivers, ratchets and air screwdrivers receive water- and particulate-free, pressure-controlled, oil-misted air, with the bracket fixing the set to the bench frame.
Start with the size and port: 200/300/400/600 step up in port and flow capacity, so match the size to the air demand of the circuit rather than the port alone. This unit is the low-pressure type, so confirm the working pressure band of your application before ordering; the exact regulation range for the low-pressure type is not published and we confirm it on request. Choose the drain (differential-pressure as here, automatic, or manual), the filter grade (40 um standard, 5 um with the W code), the gauge scale (MPa, psi or bar), and the thread: PT is the standard, with G and NPT as catalogue options to order. A bracket is included here; on the single-unit families it can be omitted with the J code. Because flow is published as curves and not as a single rated figure, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number. Tell us your application and required flow and we will confirm the sizing from the datasheet on request.
The L in the code makes this the low-pressure type regulator. The exact regulation range for the low-pressure type is not published in the material we hold, so we confirm it on request; the unit's maximum inlet pressure is 1.0 MPa (145 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.