The AirTAC GC20006LC2GK AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LC2GK is an AirTAC GC200 three-unit F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set. It cleans compressed air of water and particulate down to the standard 40 um grade, regulates downstream pressure with the low-pressure type regulator, and adds oil-mist lubrication for downstream air tools and cylinders. This configuration is built around a G1/8 port with G (BSPP) thread, uses differential-pressure drains on the filter bowl, carries PC (polycarbonate) bowls, and is fitted with a round gauge reading in psi, a reverse/check valve and a mounting bracket.
This is a genuine AirTAC part. The GC family is also available in 200, 300, 400 and 600 sizes with a choice of ports, thread options (PT standard; G and NPT to order), drain types, 40 um or 5 um filtration, gauge style and scale, and reverse-valve options. Flow is published as curves rather than a single rating, so ask us to confirm the figures against your application before ordering.
| Model | GC20006LC2GK AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to clamp cylinders on a milling or drilling fixture, holding consistent low-range clamp pressure while keeping the cylinder seals lubricated.
Prepares the air feeding diverters, pushers and bag-seal cylinders on a packaging conveyor, removing water and grit and metering oil mist so the actuators run smoothly through long shifts.
Serves a bench manifold supplying impact drivers and air ratchets at an assembly cell, with the check valve holding downstream pressure during supply dips and the gauge giving operators a psi readout.
Start with size and port: the 200 series in this code takes a 1/8 in port, and stepping up through 300, 400 and 600 gives larger ports and more flow capacity - match the step to your line demand. The differential-pressure drain on the filter bowl suits duty where a steady air flow keeps the bowl self-draining; automatic or manual drains are available in the family if your usage pattern differs. Filtration here is the standard 40 um grade - specify the W code for 5 um where finer protection is needed. The regulator in this code is the low-pressure type (L); its exact adjustment range is not published, so confirm it with us. The round gauge reads in psi; square embedded gauges and MPa or bar scales are alternatives. Thread is G (BSPP) here; PT is the standard option and NPT can be ordered. A bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Send us your line pressure and air demand and we will confirm the flow figures from the datasheet for this exact model before you order.
The L marks the low-pressure type regulator, intended for applications below the standard adjustment range; the exact range is not published, so confirm it with us. The filter bowl uses the differential-pressure drain (the default, no drain letter in the code), which passes condensate automatically while air is flowing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.