The AirTAC GC20006LF2G AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator piped as one set, so the air is cleaned, regulated and lubricated before it reaches your cylinders, valves and air tools. This GC20006LF2G is the size 200 unit with a 1/8 in G (BSPP) port, a 40 um standard filter element with a differential-pressure drain, a low-pressure type regulator fitted with an embedded square gauge scaled in psi, and a lubricator for oil-mist delivery. The bowls are polycarbonate, maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with matching port sizes, and options include a 5 um filter element (code W), automatic or manual drains, alternative gauge scales (MPa or bar), an external round gauge, and NPT thread versions ordered as catalogue options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC20006LF2G AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to clamp cylinders on a CNC fixture line, where the low-pressure regulator suits circuits that hold workpieces at reduced set pressure.
Supplies treated air to the cylinders and grippers on a carton-forming and sealing line, keeping water and particulate out of the valves while the lubricator mists the actuators.
Conditions the air feeding diverters, stoppers and lift cylinders along a conveyor system, with the square psi gauge letting operators read the line set point at a glance.
Start with the size and port: 200 is the smallest step in the GC range with a 1/8 in port here, and larger sizes (300/400/600) carry larger ports and more flow, so match the size step to the air demand of the circuit. Choose the drain for the filter bowl: differential-pressure (as fitted here) drains on a pressure differential, automatic (code A) drains without attention, and manual (code M) drains only when operated. The standard element is 40 um; specify 5 um (code W) where finer particulate removal is needed. The regulator here is the low-pressure type with a square psi gauge; gauge scales are available in MPa, psi or bar, and an external round gauge is optional. Thread is G (BSPP) on this unit; PT is the standard thread and NPT is an order option. A mounting bracket is included.
Because flow is published as curves and not as a single rated number, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the flow curve and correct sizing from the datasheet on request.
The L in the code GC20006LF2G specifies the low-pressure type regulator, intended for circuits that operate below standard set pressures; the exact adjustment range for this type is not published in the sheet, so confirm it with us on request. The F2 specifies the embedded square gauge scaled in psi, with MPa or bar scales and an external round gauge available as options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.