The AirTAC GC20006LF2GK AirTAC F.R.L. Combination Unit, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LF2GK is an AirTAC GC200 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package for compressed air. This configuration carries a G1/8 (BSPP) port, a 40 um standard filter element with a differential-pressure drain on the filter bowl, a low-pressure type regulator, a built-in reverse/check valve, and an embedded square gauge reading in psi. The filter removes water and particulate before regulation, and the lubricator adds oil mist downstream to feed air-operated tools and cylinders. Bowl material on the 200 size is PC (polycarbonate).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard; G and NPT as order options), drain types, filter grades and gauge scales. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and datasheet details against your application before ordering.
| Model | GC20006LF2GK AirTAC F.R.L. Combination Unit, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the gripper and pusher cylinders on a bottling or filling line, with the low-pressure regulator suiting circuits that run at modest working pressures and the psi gauge giving operators a familiar readout.
Supplies a compact machining or assembly cell where light-duty clamps and air tools share one supply: the 40 um element keeps water and swarf out of the valves, and the lubricator mists oil to the tools downstream.
Conditions the air feeding diverter and stopper actuators on a packaging conveyor, with the reverse/check valve holding the circuit against backflow and the differential-pressure drain clearing collected water from the filter bowl.
Choose the size and port step (200 through 600) to match the pipe bore and the air demand of the circuit; this unit sits at the small end with a G1/8 port. Where a bowl is present you can pick the drain: differential-pressure (this unit), automatic (code A) or manual (code M). Filter grade is 40 um standard or 5 um with code W if finer filtration is needed. The gauge is an embedded square gauge; the scale here is psi, with MPa and bar available as alternatives, and an external round gauge is optional. Thread is G (BSPP) on this code; PT is the standard and NPT is an order option. Note this is the low-pressure regulator type - the exact adjustment range is not published, so confirm it with us. Flow is published as curves, not a single rating, so ask us to confirm sizing against the application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this family as curves rather than a single rated figure, so we do not quote a number. Send us your air demand and line details and we will confirm the correct size and flow data from the datasheet before you order.
The L in the code marks the low-pressure type of regulator, suited to circuits that work below standard control pressures; the exact adjustment range is not published, so confirm it with us. The trailing G means a G (BSPP) port thread - PT is the standard thread and NPT is available as an order option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.