The AirTAC GC20006LF2W AirTAC F.R.L. Combination, PT1/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-preparation set. This configuration is the GC200 size with a PT1/8 (1/8 in) port, PT thread as standard, a 5 um filter element (code W, finer than the 40 um standard), a differential-pressure drain on the filter bowl, and the low-pressure regulator type. An embedded square gauge with a psi scale is fitted, a mounting bracket is included, and no reverse/check valve is fitted.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of thread (PT standard, G and NPT as order options), drain type, filter grade, gauge scale and regulator type. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm flow and datasheet figures for your application on request.
| Model | GC20006LF2W AirTAC F.R.L. Combination, PT1/8, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding the small pneumatic cylinders and grippers on a carton-forming or wrapping station, where the 1/8 in port matches compact machine piping and the low-pressure regulator holds a reduced circuit pressure.
Conditioning bench air for instruments, small actuators and air jets in a lab or QA cell, where the 5 um element protects sensitive equipment and the psi gauge gives a direct local reading.
Serving a single air drop at a maintenance or assembly bench: the filter removes water and fine particles, the regulator sets tool pressure, and the lubricator mists oil to extend small air-tool life.
Choose the GC200 size when your line calls for the smallest step of the GC range at a 1/8 in port; larger sizes (300/400/600) step up in port and flow capacity, which we confirm against your demand before ordering. This unit carries the 5 um element (W) - pick it over the 40 um standard when downstream valves, cylinders or instruments need finer particulate and water removal. The drain is differential-pressure (the default): it bleeds collected condensate automatically on the pressure differential, with no daily manual draining; automatic (A) and manual (M) drains are available across the family. The regulator here is the low-pressure type (L) - the exact adjustment range for this variant is not published in our sheet, so confirm it with us against your set-pressure requirement. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are the other catalogue choices. Thread is PT as standard - order G (BSPP) or NPT if your piping needs it - and the included bracket simplifies panel or frame mounting.
One honest note on sizing: filter and regulator flow are published as curves, not a single rated figure, so send us your application details and we will confirm the sizing before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application details (supply pressure, downstream demand and allowable pressure drop) and we will confirm the flow and datasheet figures for this exact model on request.
The L in the code marks the low-pressure regulator type, selected where the circuit works at reduced set pressures rather than the standard range. The exact adjustment range for this low-pressure variant is not published in our sheet, so please confirm the range with us against your set-point before ordering. The fitted square gauge reads in psi, and MPa or bar scales are available as catalogue options.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.