The AirTAC GC20006LF2WGK AirTAC 3-Unit F.R.L. Combo, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20006LF2WGK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built as one coordinated set. This GC200 configuration is made for 1/8 in (G1/8) ports and carries the 5 um filter element (code W) for finer water and particulate removal than the standard 40 um grade. The polycarbonate bowl uses a differential-pressure drain, the regulator is the low-pressure type with an embedded square gauge scaled in psi, a reverse/check valve is fitted, and the mounting bracket is included.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and catalogue options include automatic or manual drains, the 40 um standard element, gauge scales in MPa, psi or bar, an external round gauge, and PT, G or NPT threads. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC20006LF2WGK AirTAC 3-Unit F.R.L. Combo, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Conditioning the air right at the tool station in an assembly plant: the 5 um element strips fine particulate and condensed water before it reaches air tools and cylinders, the lubricator carries an oil mist to the tools, and the low-pressure regulator holds a gentle setpoint for light clamping circuits.
Feeding the air-blast and workholding circuits of a CNC machining center from one GC200 set: filtered, regulated and lubricated air in the right order, with the fitted reverse/check valve helping hold downstream pressure if the shop supply dips.
Supplying carton sealers, case erectors and conveyor diverters on a packaging line: the embedded square psi gauge lets operators verify setpoints at a glance, and the differential-pressure drain keeps the polycarbonate bowl clear without a manual draining routine.
Start with size and port: GC200 is the smallest step in the GC range and this unit is drilled for G1/8 ports; step up to GC300, GC400 or GC600 when the line's flow demand outgrows the port. This model already carries the 5 um (W) element - choose it when downstream valves and cylinders need finer filtration than the 40 um standard - and the differential-pressure drain bleeds the bowl automatically as air passes, with no manual draining routine. The regulator here is the low-pressure type, so confirm its adjustment range against your setpoint before ordering; the embedded square gauge reads in psi, and MPa or bar scales plus an external round gauge are catalogue options. Thread is G (BSPP); PT (the standard) and NPT versions can be ordered, and the bracket is included. Because AirTAC publishes flow as curves rather than a single rated figure, send us your flow requirement and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and required flow and we will confirm from the datasheet whether this GC200 set with its G1/8 ports suits your application - and if not, we will point you to the right size in the range.
The L marks the low-pressure regulator type rather than the standard one. It is intended for lower setpoints, and because its exact adjustment range is not published in the catalogue we confirm it on request against your setpoint. The rest of the code decodes as: 200 = size, 06 = 1/8 in port, F2 = square gauge with psi scale, W = 5 um filter element, G = G (BSPP) thread, and K = reverse/check valve fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.