The AirTAC GC20006MC2GK AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one air-treatment set. This configuration, the GC20006MC2GK, is the 200 size with G1/8 (BSPP) ports and carries a manual-drain filter bowl with the standard 40 um filter element, a standard-type regulator with an included round gauge scaled in psi, a reverse/check valve, and a mounting bracket. The bowls on the 200 size are polycarbonate, so the unit suits general compressed-air duty where the bowls remain visible for level and condensate checks.
This is a genuine AirTAC part. The GC family is available in 200, 300, 400 and 600 sizes with a choice of port, drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um optional), gauge type and scale, thread (PT standard, G and NPT as order options) and bracket configuration. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
| Model | GC20006MC2GK AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding a compact bench press or clamping cylinder: the filter removes water and particulate from the shop-air drop, the regulator sets the working pressure for the stroke, and the lubricator mists oil to the valve and cylinder seals.
Point-of-use treatment on a carton sealer or wrapping machine: clean, regulated, lubricated air at the machine inlet protects the directional valves and small actuators that cycle throughout the shift.
Supplying hand tools, air cylinders and fixtures at an assembly workstation: one F.R.L. set conditions the branch line, with the psi gauge giving the operator a local pressure reference and the check valve holding the circuit against backflow.
Start with the port step: the 200 size here is the smallest in the GC range (G1/8 / 1/8 in), and moving up to 300, 400 or 600 gives larger ports and more flow capacity - match the size to the air consumption of the downstream circuit rather than to the port alone. For the drain, manual means someone drains the bowl by hand, while differential-pressure (the default) and automatic drains handle condensate without that routine; choose manual only where a drain check is part of normal maintenance. The 40 um element fitted here is the standard grade; specify code W for the 5 um element if finer filtration is needed. The gauge fitted is a round gauge scaled in psi; embedded square gauges and MPa or bar scales are the other options.
Thread is G (BSPP) on this unit; PT is the catalogue standard and NPT is available as an order option, so confirm the thread your piping needs before ordering. A bracket is included, and the reverse/check valve is fitted. Because flow is published as curves rather than a single rated figure, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and air consumption and we will confirm the sizing and the datasheet flow curves for this unit on request.
The M in the code means the filter bowl is drained by hand, which suits installations where a check is already part of the maintenance routine. The GC family is also available with differential-pressure drain (the default) or automatic drain; the regulator adjustment range differs by drain type, with manual-drain units covering 0.05-0.9 MPa (7-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.