The AirTAC GC20006MF2WK AirTAC F.R.L. Combination Unit 1/8 in PT is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one air-preparation unit. This GC20006MF2WK is the size 200 combination with a 1/8 in PT port. The filter element is the fine 5 um grade (W) for cleaner air downstream, the bowl is drained manually, and the regulator is the standard type with an embedded square gauge reading in psi. A reverse/check valve is fitted, and the mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard, G and NPT as order options), drain types, filter grades and gauge scales. Flow figures are published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC20006MF2WK AirTAC F.R.L. Combination Unit 1/8 in PT |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds a machining centre's air-actuated clamps and fixtures: the 5 um filter keeps fine particles out of clamp cylinders, the regulator holds a steady clamping pressure, and the lubricator mists oil to the actuating cylinders.
Prepares air for the pick-and-place cylinders and diverters on a packaging conveyor: filtered, regulated and lubricated air keeps the small bore cylinders on the line running smoothly through each shift.
Serves a workbench air drop powering hand-held pneumatic tools and small actuators: the regulator lets the operator set bench pressure, the lubricator oils the tools, and the manual drain clears collected water from the bowl.
Start with the size and port: 200 is the smallest step in the GC range, and larger sizes (300/400/600) carry larger ports and higher flow capacity - match the port to your supply line and let the required flow guide the size step. Choose the drain type: manual drain (this unit) means someone drains the bowl on a schedule, while automatic or differential-pressure drains suit unattended installations. Choose the filter grade: 40 um is the standard element, 5 um (W, as fitted here) protects finer downstream components. Gauge scale can be MPa, psi or bar, and the thread is PT as standard with G and NPT available to order.
One honest note on sizing: flow for this series is published as curves, not as a single rated figure, so please ask us to confirm the datasheet flow against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one rated flow number we can quote. Tell us your application and supply pressure and we will confirm the datasheet flow figures for this unit on request.
The M in the code GC20006MF2WK specifies a manual drain on the filter bowl: collected water is released by hand. Choose manual drain where the unit is accessible and checked regularly; choose an automatic or differential-pressure drain where the installation runs unattended. The GC20006MF2WK also carries the 5 um (W) filter element, a square psi gauge and a reverse/check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.