The AirTAC GC20006MLC2WGK AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled as one air-preparation set. This GC200 configuration is the 200 size with a G1/8 (BSPP) port. The filter element is the fine 5 um grade (code W) for cleaner downstream air, the bowls are drained manually, and the regulator is the low-pressure (L) type. A round psi-scale gauge is fitted, a reverse/check valve is included, and the set comes with a mounting bracket. The polycarbonate bowls suit this size range; only the 600 size uses aluminium alloy bowls.
This is a genuine AirTAC part. The GC family spans the 200, 300, 400 and 600 sizes with port sizes from 1/8 in up to 1 in, and options for thread type (PT standard, G or NPT to order), drain type, filter grade, gauge style and scale. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC20006MLC2WGK AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to impact drivers, air ratchets and clamping fixtures at assembly stations, with the fine 5 um element protecting tools from water and particulate carryover.
Conditions the supply to pneumatic workholding clamps, tool-change cylinders and chip-clearing jets on machining centres, where the low-pressure regulator setting and psi gauge suit sensitive clamping circuits.
Prepares air for case packers, palletizer grippers and conveyor stopper cylinders, with the lubricator keeping cylinder seals and valves running smoothly through continuous shift operation.
Start with the size and port: the 200 series steps up to the 300, 400 and 600 sizes as your port and air demand grow, so match the port to your line and let the required flow drive the size choice - we can check the published flow curves against your consumption if you send the figures. This unit is already configured with the fine 5 um element (the 40 um standard grade is the alternative), a manual drain (automatic and differential-pressure drains are the other catalogue choices), a low-pressure regulator, a round psi gauge, and a check valve. If you need a different gauge scale, MPa and bar scales are also available. Thread is G (BSPP) here; PT is the standard thread and NPT is an additional order option. A bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a l/min, m3/h or SCFM number. Send us your required flow and working pressure and we will confirm the sizing from the datasheet before you order.
The M in the code specifies a manual drain, so the filter bowl is drained by hand as part of routine maintenance; automatic and differential-pressure drains are the other catalogue options if you prefer unattended drainage. The W specifies the fine 5 um element instead of the 40 um standard grade, which suits downstream equipment that needs cleaner air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.