The AirTAC GC20006MLF2G AirTAC F.R.L. Combination, G1/8, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC series is a three-unit F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one supply package that cleans, regulates and lubricates compressed air in a single installation. This configuration, the GC20006MLF2G, is the size 200 unit with a G1/8 (1/8 in) port and G thread. It carries the standard 40 um filter element with a manual drain bowl (polycarbonate at this size), a low-pressure type regulator, an embedded square gauge with psi scale, and no reverse/check valve. The mounting bracket is included. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of port sizes, PT, G or NPT threads, manual, automatic or differential-pressure drains, a 5 um filter element option, gauge scale options and low-pressure or standard regulator types. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and flow figures for your application on request.
| Model | GC20006MLF2G AirTAC F.R.L. Combination, G1/8, Manual Drain |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding a compact clamping or light press circuit where the air must be filtered, held at a low regulated pressure and lubricated before it reaches the cylinders, with the psi gauge giving the operator a direct read of the set pressure.
Conditioning the supply to diverters, sealers and small packaging actuators on a conveyor line, where the 40 um element keeps particulate and water out of the valves and the lubricator keeps mist oil in the air for the actuators.
Serving individual assembly benches and air tools from a plant drop, where one three-unit package gives each station its own clean, regulated, lubricated air without needing three separate components plumbed in line.
Start with the size and port: the 200 frame with a G1/8 port is the smallest step in the GC range, so match it against the air consumption of the machine or circuit it will feed, and step up to 300, 400 or 600 if the demand is higher. This unit uses the standard 40 um filter element, which suits general-purpose pneumatic supply; if the downstream equipment needs finer filtration, the 5 um (W) element is the option to specify. The manual drain means someone opens the bowl drain during routine checks rather than relying on an automatic or differential-pressure mechanism - choose it where bowls are checked regularly, and ask us about automatic or differential-pressure drains if unattended draining matters.
The regulator here is the low-pressure type, and the exact adjustment range for that type is not published in the sheet we work from, so confirm the set pressure you need with us before ordering. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are the alternatives. PT is the standard thread and G or NPT are catalogue options - order the one that matches your plumbing, not a delivery preference. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number for this unit. Tell us the air demand of the machine or circuit you want to feed and we will confirm the sizing and the datasheet flow figures against your application on request before you order.
The M in the code GC20006MLF2G specifies a manual drain, which means the filter bowl is drained by hand during routine checks. Automatic (A) and differential-pressure (blank) drains are catalogue options on the GC series if you would rather not rely on someone opening the drain, so ask us to quote the alternative drain type if that suits your installation better.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.