The AirTAC GC20006MLF2WK AirTAC F.R.L. Unit, PT1/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC20006MLF2WK is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembled set: a separate filter, a pressure regulator and an oil-mist lubricator. This 200-size unit is decodes to a PT1/8 (1/8 in) port, so it suits compact pneumatic circuits with modest air demand. The filter element is the fine 5 um grade (the W option) for cleaner air than the standard 40 um element, and the bowl is drained by hand via the manual drain, so an operator or maintenance routine opens the drain as part of normal checks. The regulator is the low-pressure type and carries a fitted square gauge reading in psi, and a reverse/check valve is fitted to hold downstream settings. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The filter and lubricator bowls on this size are polycarbonate (PC).
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade, gauge style and scale, thread (PT standard, G and NPT as order options) and reverse/check valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and flow figures for your application on request.
| Model | GC20006MLF2WK AirTAC F.R.L. Unit, PT1/8, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-06 filter, GR200-06 regulator and GL200-06 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/8" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-06 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to hand-held pneumatic screwdrivers, riveters and small press tools at an assembly workstation, where the 5 um element protects the tools and the psi gauge gives operators a clear setting reference.
Conditioning the supply to compact packaging and labelling machines with small pneumatic actuators and air jets, where fine filtration, a stable low-pressure setting and light oil misting keep cylinders and valves working smoothly.
Providing clean, regulated, lubricated air to bench-top test rigs and laboratory pneumatic fixtures, where the manual drain suits supervised use and the check valve helps hold the set pressure if the supply dips.
Size and port: the 200 size with a PT1/8 port is the smallest step in the GC range; step up to 300/400/600 (up to PT1) when the circuit needs more flow capacity - we confirm sizing against the published flow curves before you order. Drain: this unit has the manual drain (code M), which suits installations where someone is on site regularly; automatic or differential-pressure drains are available on other configurations if unattended drainage matters. Filter grade: the fitted 5 um element (code W) is the finer choice over the standard 40 um - useful where downstream valves and cylinders see finer contamination. Gauge: the square gauge is embedded and reads psi; MPa and bar scales and an external round gauge are order options. Thread is PT as standard with G (BSPP) and NPT available to order, and the reverse/check valve (code K) is fitted on this unit. Mounting bracket is included. The regulator on this unit is the low-pressure type; its exact adjustment range is not published in the material we hold, so confirm it with us on request.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-06 regulator with a GF200-06 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated number, so we do not quote a rated flow figure. Tell us your application and we will confirm the flow and datasheet figures for this exact model on request before you order.
The M in the code selects the manual drain, so the filter bowl is emptied by hand as part of routine maintenance rather than automatically - a good fit where the unit is checked regularly. The W code selects the finer 5 um element instead of the standard 40 um, giving cleaner air to downstream valves and cylinders. If you need unattended drainage, ask us about automatic or differential-pressure drain configurations.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.