The AirTAC GC20008C2G AirTAC F.R.L. Combination Unit, G1/4 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20008C2G is an AirTAC GC series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one prepared air supply. This configuration is built around a G1/4 (1/4 in) port with G thread, a 40 um standard filter element, a differential-pressure drain on the filter bowl, and a standard regulator adjustable from 0.15-0.9 MPa (20-130 psi). A round gauge scaled in psi is fitted so line pressure can be read and set directly, and the polycarbonate bowls suit the -5 to 70 C (non-freezing) operating range. Maximum inlet pressure is 1.0 MPa (145 psi), and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of port sizes, thread options (PT standard, G and NPT to order), drain types, 5 um (W) filtration, gauge style and scale, and low-pressure regulator variants. Published flow data appears as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC20008C2G AirTAC F.R.L. Combination Unit, G1/4 Port |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding a pneumatic press cylinder on a metal stamping line: the filter strips water and swarf from the shop air, the regulator holds a steady setting for repeatable press force, and the lubricator mists oil to the cylinder seals and valve spools.
Preparing air for the stopper, gate and diverter cylinders that control bottles on a packaging conveyor. Clean, regulated, lubricated air keeps the divert actions consistent through long shifts and protects the directional valves from moisture carryover.
Conditioning the supply to a CNC machining centre's pneumatic panel, where the tool-change clamp, chip-door actuator and air-blast nozzles all draw from one line. The psi round gauge lets the setter verify the clamp pressure at the machine.
Start with the size and port: 200 is the smallest GC frame, and the port step (here G1/4) should match your piping so the unit is not the bottleneck in the circuit. Choose the drain to suit access: differential-pressure (as fitted here) drains automatically under flow, automatic (code A) drains on a timer-free cycle, and manual (code M) needs someone to press the drain. Filter grade is 40 um standard; specify 5 um (code W) where downstream valves and cylinders need finer protection. Gauge scale is selectable (MPa, psi or bar) and the round external gauge shown here is an option from the embedded square standard. Thread is PT as standard with G and NPT available to order; this unit carries the G option. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so there is no one number we can honestly quote. Send us your line pressure, downstream demand and acceptable pressure drop, and we will confirm the sizing from the datasheet curves on request before you order.
PT is the catalogue-standard thread for the GC series, but G (BSPP) and NPT are available as ordering options, and GC20008C2G is the G-thread variant with a 1/4 in port. Order the suffix that matches your piping: no suffix for PT, G for BSPP, T for NPT. This is a specification choice, not a stock or delivery matter.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.