The AirTAC GC20008F2G AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC20008F2G is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air from a single mounted set: a separate filter, a pressure regulator and an oil-mist lubricator. This size 200 unit is fitted with G1/4 (1/4 in) ports, a 40 um standard filter element and a differential-pressure drain that bleeds accumulated condensate automatically as the pressure differential across the bowl changes, so no manual draining routine is needed. The standard regulator adjusts over 0.15-0.9 MPa (20-130 psi) and carries an embedded square gauge reading in psi, while the lubricator meters oil mist into the downstream air for pneumatic tools and cylinders. The bowls on the 200 size are polycarbonate (PC), and a mounting bracket is included.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with port options from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drains, a 5 um fine-filter element (code W) in place of the standard 40 um, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC20008F2G AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeds spray guns and air-assisted applicators on a paint line with water and particulate stripped out, pressure held steady at the gun, and a light oil mist to keep gun triggers and air motors running smoothly.
Conditions the air feeding carton-forming and case-sealing cylinders on a packaging conveyor, protecting seals from condensate and dirt while keeping actuator pressure consistent through each shift.
Supplies filtered, regulated and lubricated air to pneumatic clamps and tool-change actuators on a machining centre, where steady regulated pressure and clean air protect the clamping sequence.
Start with the port and size step: the GC series runs 200/300/400/600 with ports from 1/8 in to 1 in, and the right step depends on the air consumption of the machines downstream - we can check the flow curves against your demand before you order. Choose the drain type: this unit has the differential-pressure drain (default), with automatic (code A) and manual (code M) available; note that with a differential-pressure or automatic drain the regulation range is 0.15-0.9 MPa, while a manual-drain set widens it to 0.05-0.9 MPa. Filter grade is 40 um standard; specify 5 um (code W) if finer particulate removal is needed. Gauge scale on this unit is psi (square gauge fitted; external round gauge optional, MPa/psi/bar scales). Thread: PT is the standard, with G and NPT as catalogue options to order - this unit is the G-thread version, G1/4. A mounting bracket is included. Because flow is published as curves and not a single rating, send us your application details and we will confirm sizing from the datasheet.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your operating pressure and the air consumption of the equipment you are feeding, and we will confirm the flow from the datasheet and check the sizing against your application before you order.
The differential-pressure drain is the default: it discharges collected condensate automatically as flow creates a pressure differential across the bowl, with no manual routine. You can instead order the set with an automatic drain (code A) or a manual drain (code M); note that with a manual drain the regulator range widens to 0.05-0.9 MPa, while the differential-pressure and automatic versions adjust over 0.15-0.9 MPa (20-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.