The AirTAC GC20008F2WK AirTAC F.R.L. Combination, PT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC20008F2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This configuration is size 200 with PT1/4 ports, carries the W-grade 5 um filter element for finer water and particulate removal, uses the differential-pressure drain on the filter bowl, and includes the standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range. The embedded square gauge is fitted with a psi scale, a reverse/check valve is installed, and the mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch, and options including thread type (PT standard, G or NPT to order), drain type, filter grade and gauge scale. Flow is published as curves rather than a single rated figure, so we confirm datasheet figures on request before you order.
| Model | GC20008F2WK AirTAC F.R.L. Combination, PT1/4, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding a production-floor air drop that serves pneumatic hand tools, clamps and small actuators, with filtered, regulated and lubricated air delivered from one 1/4 inch supply point.
Conditioning the air feeding conveyor diverters, pushers and packaging cylinders, where the 5 um element protects valve spools and the lubricator keeps cylinder seals running smoothly.
Supplying machine-tool clamping and tool-change circuits that need stable regulated pressure, clean 5 um air and oil mist for the actuator side of the circuit.
Choose the size and port step against the air demand of the circuit: this unit is size 200 with 1/4 inch PT ports, the entry step of the GC range. The 5 um W-grade element suits points where finer particulate removal is wanted; the 40 um standard element remains available on other codes. Drain is differential-pressure here, with automatic and manual drain variants offered in the family. The fitted square gauge reads in psi (MPa and bar scales are also offered), the reverse/check valve holds downstream pressure, and the bracket is included. Thread is PT as standard; G (BSPP) and NPT are order options. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your line pressure and the air demand of the circuit, and we will confirm the sizing from the datasheet curves on request before you order.
The W in the code GC20008F2WK selects the optional 5 um element instead of the 40 um standard, giving finer particulate removal. The F2 selects the embedded square gauge with a psi scale; MPa and bar scales are also offered. The K adds a reverse/check valve, and the blank bracket position means the mounting bracket is included.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.