The AirTAC GC20008LC2G AirTAC F.R.L. Combination, G1/4, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC20008LC2G is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one supply unit. This 200-size configuration is built for 1/4 inch ports with G (BSPP) parallel thread, carries the standard 40 um filter element with a differential-pressure drain on the filter bowl, and fits the low-pressure type of regulator with a round external gauge scaled in psi. The bowls on the filter and lubricator are polycarbonate, and a mounting bracket is included.
This is a genuine AirTAC part from the GC series, which spans 200, 300, 400 and 600 sizes with port options from 1/8 to 1 inch, a choice of drain types, a 5 um filter element option, gauge scales in MPa, psi or bar, and PT, G or NPT threads. Flow figures for this unit are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC20008LC2G AirTAC F.R.L. Combination, G1/4, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding clamping cylinders on a fixture line: the filter strips water and swarf from the shop-air drop, the low-pressure regulator holds the clamping circuit at its set pressure, and the lubricator mists oil into the cylinder air to keep seals and bores working.
Supplying the extend-retract cylinders on a carton or tray conveyor: clean, regulated, lubricated air at the machine keeps the diverters and pushers cycling through a shift without moisture sludge in the valve bank.
Mounted at the point of use on a plant-air drop serving hand tools and small actuators: the three-unit set conditions the branch supply in one bracket-mounted assembly, with the psi gauge giving operators a local pressure readout.
Choose the GC size by the port and flow your line needs: this 200-size unit steps up to 1/4 inch G-thread ports, with larger 300, 400 and 600 sizes available for bigger supplies. The filter element here is the standard 40 um grade; specify code W if the downstream valves need the finer 5 um grade. The drain on the filter bowl is differential-pressure, which bleeds collected condensate as inlet-to-outlet pressure difference builds; automatic (A) and manual (M) drains are the other catalogue choices. This code selects the low-pressure regulator type; its exact adjustment range is not published in the catalogue, so confirm it with us against your set pressure. The round gauge fitted here reads in psi, with MPa and bar scales available as alternatives.
Thread is the other decodable choice: PT is the standard thread, while G (BSPP) as selected here and NPT are catalogue options to order. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure, set pressure and the consumers you are feeding, and we will confirm the sizing against the datasheet curves before you order.
The trailing G selects G (BSPP) parallel thread on the 1/4 inch ports. PT is the standard thread for this series, and G and NPT are catalogue options you select by code, so you can order the connection style your pipework uses as a specification choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.