The AirTAC GC20008LC2WGK AirTAC F.R.L. Combination, G1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC20008LC2WGK is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set for compressed-air circuits. This 200-size unit is built with G1/4 ports, a 5 um filter element (the finer of the two published grades), a differential-pressure drain on the filter bowl, and a low-pressure-type regulator for circuits that operate below standard line pressure. A round gauge on the psi scale is fitted, a reverse (check) valve is included, and a mounting bracket comes with the unit. The filter and lubricator bowls are polycarbonate (only the 600 size uses aluminium alloy).
This is a genuine AirTAC part. The GC series is available in 200, 300, 400 and 600 sizes with a choice of drain type, filter grade, gauge style and scale, thread option and bracket arrangement. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and any datasheet figure against your application before ordering.
| Model | GC20008LC2WGK AirTAC F.R.L. Combination, G1/4, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Conditions the shop-air feed to a CNC machine's pneumatic actuators and tool-clamp circuit: the 5 um element strips water and fine particles, the regulator holds a steady low setpoint, and the lubricator mists oil to the air-driven components.
Mounted at the drop feeding the cylinders and grippers on a carton-forming and sealing conveyor, keeping the conditioned air clean, regulated and lubricated so the pick-and-place motion stays consistent through the shift.
Installed on the air line serving looms and winding machines, where the filter removes line moisture and lint-carrying particulate, the low-pressure regulator matches the machines' lower operating pressure, and the lubricator services air-motor and cylinder points.
Start with size and port: the GC series steps through 200, 300, 400 and 600, and the port grows with each step - here 200 size with G1/4 ports. Match the step to the air demand of the circuit; the published flow curves, not a single rating, are the reference, so let us confirm the fit before you order. This unit carries the 5 um (W) element rather than the 40 um standard - choose 5 um where downstream equipment needs finer particulate and water removal. The differential-pressure drain is the default; automatic (A) and manual (M) drains are available if you prefer hands-off or scheduled draining. The low-pressure-type regulator suits circuits running below standard line pressure; we confirm its exact adjustment range from the datasheet on request. Gauge style and scale (round or embedded square; MPa, psi or bar), thread (PT is standard, G and NPT are order options) and bracket arrangement are all decodable choices - this configuration ships with a round psi gauge, G thread and a bracket included.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a l/min, m3/h or SCFM figure. Send us your application's air demand and we will confirm the correct size and the flow-curve figures from the datasheet before you order.
The W code in GC20008LC2WGK selects the 5 um element instead of the 40 um standard, giving finer water and particulate removal ahead of the regulator and lubricator. The L code makes the regulator a low-pressure type for circuits running below standard line pressure; its exact adjustment range is not in the published table, so we confirm it from the datasheet on request. If your circuit runs at normal line pressure, the standard-type GC versions are the usual choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.