The AirTAC GC20008MF2WG AirTAC F.R.L. Combination Unit, G1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20008MF2WG is an AirTAC GC-series three-piece F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation unit. This configuration is the 200 size with a G1/4 port, fitted with the 5 um filter element (code W), a manual drain on the filter bowl, and the embedded square pressure gauge scaled in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi) on this manual-drain version, and no reverse/check valve is fitted. It filters water and particulate from compressed air, holds a set downstream pressure, and adds oil mist for downstream air tools and cylinders.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of port, thread (PT standard, G and NPT as order options), drain type, filter grade and gauge scale. Rated flow for this combination is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC20008MF2WG AirTAC F.R.L. Combination Unit, G1/4, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeding a foot-pedal air press that forms small brackets: the filter stage strips water and chips from the shop-air drop, the regulator holds a steady setting so each stroke is consistent, and the lubricator mists oil to the press cylinders and valves.
Conditioning the air feeding conveyor stop-gates and bottle-gripper cylinders on a packaging line: clean, regulated and lubricated air keeps the gripper action repeatable through long shifts, with the psi gauge giving operators a visible setpoint.
Supplying impact wrenches, air ratchets and blow guns at a plant maintenance bench: the 5 um element protects the tools from water and grit, the regulator lets the technician set tool pressure from the psi gauge, and the lubricator carries oil mist into the tool motors.
Start with the size and port: the 200 size with its 1/4 in port suits lighter air demand, while 300, 400 and 600 step up in port and capacity - match the step to the flow your line needs, and we will confirm the flow curves against your application before you order. Choose the drain to suit access: this unit has a manual drain, which needs periodic draining by hand; automatic and differential-pressure drains are available on other codes where the bowl cannot be reached easily. The 5 um element here is the finer of the two published grades (40 um is standard); pick 5 um where downstream valves and cylinders need cleaner air. The square gauge is scaled in psi here, with MPa and bar scales offered on other codes, and an external round gauge is optional. Thread is G on this code, with PT (standard) and NPT available to order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or l/min number for this unit. Tell us your application and we will confirm the flow data from the datasheet and check the sizing for you before you order.
This code carries the M drain option, so condensate collected in the filter bowl is released by hand - a good fit where the unit is accessible and air demand is light. If the bowl sits in an awkward spot or the line runs continuously, choose a code with an automatic drain or the default differential-pressure drain instead; we can help you pick the right variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.