The AirTAC GC20008MLC2K AirTAC F.R.L. Combination, PT1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20008MLC2K is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This size 200 configuration is built for 1/4 in PT ports and carries a 40 um filter element with a manual drain, so condensate is released by hand rather than automatically. The regulator is the low-pressure type, and the unit is fitted with an external round gauge reading in psi, a reverse/check valve, and a mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The filter and lubricator bowls on this size are polycarbonate (PC).
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of drain type, filter grade (40 um standard, 5 um optional), gauge style and scale, thread form and reverse valve. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing against your application before ordering.
| Model | GC20008MLC2K AirTAC F.R.L. Combination, PT1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
A paint line that runs spray guns at reduced line pressure can use this low-pressure regulator behind a 40 um filter, with the lubricator misting the gun and hose downstream of the set.
Stopper and pusher cylinders along a bottling conveyor take filtered, regulated and lubricated air from this 1/4 in set, with the round psi gauge letting an operator verify set pressure at a glance.
Clamp cylinders on a milling or drilling fixture hold more consistently on clean, regulated, lubricated air; the check valve helps hold the circuit if upstream supply dips, and the bracket fixes the set to the machine frame.
Start with the size and port step: this unit is size 200 with 1/4 in PT ports, the smallest step in the GC range, so match it to the line size and let us confirm the flow curve against your air demand. The manual drain means someone drains the filter bowl by hand on a routine basis; if you cannot guarantee that, ask about automatic or differential-pressure drain versions. The 40 um element is the standard grade; a 5 um element (code W) is available where finer filtration is wanted. The fitted round gauge reads in psi, and MPa or bar scales can be specified instead. PT is the standard thread; G (BSPP) and NPT are catalogue options to order. A mounting bracket is included, and the reverse/check valve is fitted on this code. Because flow is published as curves and not a single rating, ask us to confirm sizing against the application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so there is no one rated flow number we can quote. Send us your air demand and line details and we will confirm the flow curve and sizing for this 1/4 in, size 200 unit from the datasheet before you order.
The L in the code marks the low-pressure regulator variant, intended for circuits that run at reduced set pressures rather than full line pressure. The exact adjustment range for this variant is not published as a single figure, so tell us your working pressure and we will confirm suitability from the datasheet on request.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.