The AirTAC GC20008MLF2K AirTAC F.R.L. Combination, PT1/4, Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC200 series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, assembled to condition compressed air in one station. This GC20008MLF2K is the size 200 unit with PT1/4 (1/4 in) ports. The filter section carries the standard 40 um element with a manual drain bowl in PC (polycarbonate), so condensate is released by hand during checks. The regulator is the low-pressure type and is fitted with an embedded square gauge scaled in psi. A reverse (check) valve is fitted, and the mounting bracket is included.
This is a genuine AirTAC part. The GC line is offered in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, with manual, automatic or differential-pressure drains, a 5 um (W) filter element option, gauge scale choices and G or NPT thread options. Flow is published in the catalogue as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC20008MLF2K AirTAC F.R.L. Combination, PT1/4, Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to machine-tool actuators and spindle-air seals at an individual machining cell, with the check valve holding downstream pressure if the supply dips.
Conditions the air feeding carton-forming and case-packing cylinders on a packaging conveyor, keeping water and debris out of valves while the lubricator mists oil to the pneumatic cylinders.
Installed at a bench assembly station where air tools and clamping fixtures share one supply: the filter cleans the air, the low-pressure regulator sets a safe working pressure, and the lubricator feeds the tools.
Start with the size and port: the 200 series steps up through 300, 400 and 600 with larger ports and higher flow capacity, so match the port (here PT1/4) and the air demand of the circuit. Drain choice matters in practice: the manual drain on this unit is emptied by hand and suits stations that are checked routinely; automatic or differential-pressure drains are available where unattended condensate removal is preferred. The standard 40 um element covers general protection; specify the 5 um (W) option where finer filtration is required. The square gauge here is scaled in psi; MPa and bar scales are also available. PT is the standard thread on this model, with G (BSPP) and NPT offered as order options. A bracket is included with this unit. Because flow is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves in the catalogue, not as a single rated number, so we do not quote a figure that is not in the datasheet. Tell us your application and we will confirm the flow curve and sizing against it on request.
The M in the code sets a manual drain: condensate collected in the filter bowl is released by hand, which suits stations that are inspected regularly. The GC series is also available with automatic (A) or differential-pressure (blank) drains if you prefer unattended condensate removal.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.