The AirTAC GC20008MLF2WK AirTAC F.R.L. Combination, PT1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC20008MLF2WK is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, pressure regulator and lubricator assembled as one air-preparation set for compressed air. This configuration is built around a PT1/4 (1/4 in) port with standard PT thread, a 5 um filter element (the finer of the two published grades, 40 um being standard), a manual drain on the filter bowl, and a low-pressure type regulator. The square gauge fitted to this unit reads in psi, and a reverse/check valve is fitted to hold downstream pressure if the upstream supply is interrupted. The polycarbonate bowls are suited to the published -5 to 70 C (non-freezing) operating range, with a maximum inlet pressure of 1.0 MPa (145 psi).
This is a genuine AirTAC part. The GC200 size is the compact step in the GC range, which spans sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard, G and NPT as order options), drain types, filter grades, gauge scales and bracket options. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC20008MLF2WK AirTAC F.R.L. Combination, PT1/4 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-08 filter, GR200-08 regulator and GL200-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · PT1/4" · 5 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-08 |
| Build order | Filter → regulator → lubricator |
A bench-mounted clamping fixture fed at a low set pressure: the GC20008MLF2WK filters the shop air to 5 um, regulates it with the low-pressure type regulator, oils the downstream cylinders via the lubricator, and the check valve holds the clamp if supply air drops.
A spray booth take-off point where clean, regulated, lubricated air matters: the 5 um element removes water and particulate before the gun, the manual drain is bled at shift start, and the psi square gauge gives the operator a direct setpoint readout.
A packaging line running small actuated cylinders and air jets from a 1/4 in drop: this three-unit set conditions the air at the drop point, the low-pressure regulator suits gentle actuation, and the included bracket mounts the set beside the machine frame.
Choose the GC200 size and its PT1/4 port to match your line's connection and expected air demand - larger sizes carry larger ports and more flow, and the published flow curves (not a single rating) are the honest way to size the unit, so let us confirm the fit against your application before ordering. This configuration already fixes several real choices: the 5 um element (W) for finer water-and-particulate removal than the 40 um standard, a manual drain you operate by hand rather than an automatic or differential-pressure drain, and a low-pressure type regulator whose exact adjustment range is not published - confirm it with us if your setpoint matters. The square gauge reads in psi; external round gauges and MPa or bar scales are the other published options. PT is the standard thread on this unit, with G (BSPP) and NPT available as order options, and a mounting bracket is included.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-08 regulator with a GF200-08 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated number, so we do not quote a rated flow, Cv or SCFM figure. Tell us your application and we will confirm the sizing against the datasheet curves on request before you order.
The M in the code specifies a manual drain on the filter bowl: you open it by hand to purge collected water, instead of the automatic or differential-pressure drain options. The L specifies the low-pressure type regulator; its exact adjustment range is not published, so confirm it with us if your setpoint is critical.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.