The AirTAC GC30008MF2W AirTAC F.R.L. Combination, PT1/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC30008MF2W is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled to condition compressed air in one station. The filter element is the fine 5 um grade (W) and the bowl has a manual drain, so condensate is released by hand on your maintenance schedule. The standard regulator adjusts from 0.05 to 0.9 MPa (7-130 psi) and carries an embedded square gauge scaled in psi; an external round gauge is optional. The lubricator adds oil mist downstream for air tools and cylinders. Maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the bowls on this 300 size are PC (polycarbonate). The port is PT1/4 (1/4 in), with PT as the standard thread, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600, with port sizes from 1/8 to 1 inch, a choice of manual, automatic or differential-pressure drains, 40 um standard or 5 um (W) fine filtration, gauge scale options, and G (BSPP) or NPT thread variants to order. Rated flow for this combination is published as curves rather than a single figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC30008MF2W AirTAC F.R.L. Combination, PT1/4, 5 um |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to impact wrenches, nut runners and clamping cylinders at assembly stations, with the 5 um element protecting tools from fine particulate and the lubricator extending tool life.
Conditioning the air supply to pneumatic cylinders that drive box forming, sealing and pusher motions on a packaging conveyor, where stable regulated pressure keeps stroke timing consistent across shifts.
Supplying clean, regulated, lubricated air to workholding clamps and tool-change actuators on a machining centre, with the psi-scaled gauge letting operators verify set pressure at a glance.
Start with the port step: this unit is the 300 size with a PT1/4 (1/4 in) port; larger sizes (400, 600) move to bigger ports and more flow capacity, so match the size to the air demand of the line rather than only the pipe thread. The 5 um (W) element suits points of use that need finer particulate removal than the 40 um standard grade. Drain choice matters: this configuration is manual drain, which is simple and low-cost but relies on scheduled bleeding; automatic or differential-pressure drains are available if the station is unattended. The embedded square gauge here is scaled in psi; MPa or bar scales and an external round gauge can be specified. Thread is PT as standard, with G (BSPP) and NPT as orderable variants, and a bracket is included for panel or wall mounting.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated number, so we do not quote a rated flow figure. Send us your application details and we will confirm the correct size and datasheet figures before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and air demand and we will confirm the datasheet figures and check the sizing for you before you order.
The M in the code GC30008MF2W specifies a manual drain on the filter bowl: condensate is released by hand during maintenance rounds, which suits attended stations. If the unit will run unattended, the same combination can be ordered with an automatic (A) or differential-pressure (blank) drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.