The AirTAC GC30008MF2WGK AirTAC F.R.L. Combination, G1/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC30008MF2WGK is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-treatment set for compressed-air lines. This configuration is built for 1/4 in (G1/4) ports, with 5 um filtration, a manual drain on the filter bowl, a polycarbonate bowl, an embedded square gauge reading in psi, a fitted reverse/check valve and a mounting bracket included. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the set handles a maximum inlet pressure of 1.0 MPa (145 psi) at -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades, gauge scales and thread options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC30008MF2WGK AirTAC F.R.L. Combination, G1/4 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 08 | Port size PT1/4". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-08 filter, GR300-08 regulator and GL300-08 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/4" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-08 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated, lubricated air to the clutch and counterbalance circuits of a mechanical stamping press, where the check valve holds downstream pressure if the supply dips.
Conditioning the air supply to a pick-and-place robot cell, keeping gripper and actuator lines free of water and particles while the lubricator mists oil for cylinder seals.
A single treatment point on the 1/4 in air drop feeding sealing jaws and vacuum generators on a packaging line, with the psi gauge giving operators a local setpoint readout.
Step up through the GC sizes (200/300/400/600) as your port and air demand grow; this unit is the 300 size with a 1/4 in port. Choose the drain to suit access: manual (as here) for supervised draining, automatic for unattended duty, or the differential-pressure default. Filter grade is 40 um standard or 5 um (this unit, code W) when finer particle removal matters. Gauge scale is selectable (MPa, psi or bar; this unit is square, psi) and thread is PT as standard with G and NPT as orderable options. A reverse/check valve is fitted on this unit and a bracket is included.
Because flow is published as curves and not a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-08 regulator with a GF300-08 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and required flow, and we will confirm sizing against the datasheet on request before you order.
The M in the code specifies a manual drain on the filter bowl: condensate is released by operating the drain by hand, which suits installations where the bowl is accessible and checked as part of a routine. If the unit will sit unattended where nobody drains it, ask us about the automatic or differential-pressure drain variants of the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.