The AirTAC GC30010ALC2W AirTAC GC F.R.L. 3/8 in PT, 5 um, Auto Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
GC30010ALC2W is an AirTAC GC three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator built as one set. This size 300 unit is threaded PT3/8 and carries a 5 um filter element (code W) with an automatic drain, so collected condensate is expelled without manual attention. The regulator is the low-pressure type and a round gauge scaled in psi is fitted. Maximum inlet pressure is 1.0 MPa (145 psi), operating temperature is -5 to 70 C (non-freezing), and the polycarbonate bowls suit this size with a mounting bracket included.
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options include manual or differential-pressure drains, the 40 um standard element, G or NPT threads, gauge style and scale, and a reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | GC30010ALC2W AirTAC GC F.R.L. 3/8 in PT, 5 um, Auto Drain |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to impact wrenches, nut runners and pneumatic clamps along a vehicle assembly line, with the 5 um element protecting the tools from water and grit.
Conditioning the air supply to cylinders and actuators driving conveyor diverters, capping heads and case packers, where the automatic drain handles condensate through continuous shifts.
Conditioning shop air for pneumatic vices, workholding clamps and chip-clearing blasts on CNC machining cells, with the low-pressure regulator type and a local psi gauge for direct set-point reading.
The real choices when specifying a GC set are: size and port (200/300/400/600, 1/8 in to 1 in) to match the air demand of the line; drain type - automatic (as fitted here), manual, or differential-pressure; filter grade - the 5 um element on this unit or the 40 um standard; gauge style (external round or embedded square) and scale (MPa, psi or bar); and thread - PT is standard, with G (BSPP) and NPT as order options. This unit is the low-pressure regulator type; its exact adjustment range is not published in the material we hold, so we confirm it on request. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number on the page. Send us your operating pressure and air demand and we will confirm the sizing from the datasheet on request.
The L in GC30010ALC2W identifies the low-pressure regulator type; its exact adjustment range is not published in the material we hold, so we confirm it on request. The C2 in the code means a round gauge scaled in psi is fitted, while the embedded square gauge scaled in MPa, psi or bar is the alternative.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.