The AirTAC GC30010C2G AirTAC F.R.L. Combination, G3/8, 40 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30010C2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This 300-size unit carries a 3/8 in port with G (BSPP) thread, filters to the standard 40 um grade with a differential-pressure drain on the filter bowl, regulates with the standard type over 0.15-0.9 MPa (20-130 psi), and meters oil mist to downstream air tools. The regulator gauge fitted on this code is the external round type with a psi scale, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of PT, G or NPT thread, 40 um or 5 um (W) filtration, differential-pressure, automatic or manual drains, gauge style and scale, and an optional reverse/check valve. Flow is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC30010C2G AirTAC F.R.L. Combination, G3/8, 40 um |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Clean, regulated and lubricated air to fixture clamps and tool-change cylinders on a machining centre, where the 40 um filter protects valves and the lubricator keeps actuation seals working over long production runs.
Supply for carton-forming and case-sealing cylinders on a packaging line, with the regulator holding a stable setting for consistent seal pressure and the lubricator conditioning the air for high-cycle pneumatic components.
Air preparation for diverters, stoppers and pushers along a conveyor system, where filtered, regulated and lubricated supply keeps the station valves and cylinders dependable through continuous shift operation.
Size and port are the first decision: 200, 300, 400 and 600 step up in port and flow capacity, so match the size to the air demand of the circuit rather than the pipe alone. This code is 300 size with a 3/8 in G thread. For the filter stage, choose the standard 40 um element for general plant air or the 5 um (W) grade for finer protection; the drain is differential-pressure here, with automatic (A) and manual (M) available on other codes. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range; gauge style (embedded square or external round) and scale (MPa, psi or bar) are selectable, and this code carries the round psi gauge. Thread is PT as standard with G and NPT as order options, and a bracket is included.
Because flow is published as curves and not as a single rated number, we do not quote a rated flow figure. Send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a rated flow number. Tell us your application and required air demand and we will confirm the relevant datasheet figures on request before you order.
On this code C2 means the external round gauge is fitted with a psi scale. The embedded square gauge is the standard arrangement, and scales of MPa, psi or bar are available, so you can order a different gauge style or scale if your panel reads in another unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.