The AirTAC GC30010F2W AirTAC F.R.L. Combination, PT3/8, 5 um Filter is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30010F2W is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set. This size 300 configuration is threaded PT3/8, carries the 5 um (code W) filter element instead of the 40 um standard, and uses the differential-pressure drain, which bleeds accumulated condensate automatically whenever the pressure differential across the filter is high enough. The standard regulator adjusts outlet pressure over 0.15-0.9 MPa (20-130 psi), and the fitted embedded square gauge reads in psi. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The filter and lubricator bowls are PC (polycarbonate); a reverse/check valve is not fitted.
This is a genuine AirTAC part. The GC family is also available in sizes 200, 400 and 600 with other decodable options: automatic or manual drain instead of differential-pressure, the 40 um standard element, gauge scales in MPa or bar, an external round gauge, and G (BSPP) or NPT threads ordered as catalogue options. Flow figures are published as curves rather than a single rating, so ask us to confirm sizing and data-sheet values for your application before ordering.
| Model | GC30010F2W AirTAC F.R.L. Combination, PT3/8, 5 um Filter |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to impact wrenches, nutrunners and air ratchets at assembly stations, with the 5 um element helping protect tools from water and fine particulate.
Conditions the air feeding clamp and pusher cylinders on a bottling or carton-packing conveyor, holding a steady regulated pressure and oil mist for the actuators along the line.
Supplies conditioned air to pneumatic clamps and tool-changer actuators on a machining centre, where clean, regulated, lubricated air keeps the clamping sequence consistent.
Start with the port step: size 300 on this unit is PT3/8; step up to size 400 or 600, or down to size 200, if your line's port size or required flow curve points elsewhere. Choose the drain to match maintenance reality: differential-pressure (as fitted here) needs no attention while air is flowing, automatic drains continuously, and manual requires someone to open the drain. This unit already carries the finer 5 um element; the 40 um standard element is the alternative if your downstream equipment does not need the finer grade. Gauge scale is selectable (MPa, psi or bar) and an external round gauge is optional; PT is the standard thread, with G (BSPP) and NPT orderable as catalogue options. Flow is published as curves, not a single rated figure, so send us your application and we will confirm sizing against the data sheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote one number. Tell us your application and we will confirm the sizing against the data sheet on request before you order.
The W in the code GC30010F2W selects the 5 um element in place of the 40 um standard. The finer grade suits downstream equipment that is sensitive to fine particulate; if your application does not need it, the 40 um standard element is the alternative on this family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.