The AirTAC GC30010MC2 AirTAC F.R.L. Combination, PT3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC30010MC2 is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-preparation set. This configuration is the GC300 size with a PT3/8 (3/8 in) port, PT thread as standard, a manual drain on the filter bowl, the standard 40 um filter element, and a round pressure gauge reading in psi. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowls on the filter and lubricator are polycarbonate (PC) at this size, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is offered in sizes 200, 300, 400 and 600, with port options from 1/8 in to 1 in, PT / G / NPT thread variants, manual, automatic or differential-pressure drains, a 5 um (code W) filter element option, and gauge scale choices of MPa, psi or bar. Flow is published in the catalogue as curves rather than a single rated figure, so ask us and we will confirm the flow and datasheet figures for this exact model on request.
| Model | GC30010MC2 AirTAC F.R.L. Combination, PT3/8 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the clamping fixtures, tool changers and pneumatic actuators on a CNC machining centre, with the manual drain checked as part of the daily start-up routine.
Conditioning the air feeding pick-and-place cylinders and sealing jaws on a carton packaging line, where the lubricator keeps cylinder seals running smoothly and the regulator holds a steady setting shift after shift.
Installed at the drop point of a plant air header to serve a manual assembly station, cleaning water and particulate out of the shop air, setting working pressure locally and oil-misting the hand-held pneumatic tools.
Choosing within the GC series comes down to a few decodable decisions. Step up or down by size (200 / 300 / 400 / 600) so the port and body match the flow your line needs - this unit is size 300 with a 3/8 in PT port. Pick the drain: manual (as here, code M) means an operator drains the bowl, while automatic or differential-pressure drains suit unattended installations. The standard element is 40 um; specify code W for the 5 um grade if downstream valves need finer filtration. Gauges are available in MPa, psi or bar scales - this unit carries a round psi gauge. Thread is PT as standard, with G (BSPP) and NPT available as order options, and a mounting bracket is included.
One honest note on sizing: AirTAC publishes flow for these units as curves, not as a single rated number, so we do not quote a flow figure here. Tell us your application and we will confirm the sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for the GC series as curves in the catalogue rather than as a single rated figure, so we do not state a flow number here. Send us your application details and we will confirm the flow from the datasheet for this exact model on request.
The M in GC30010MC2 decodes to a manual drain on the filter bowl: an operator opens the drain to expel collected water and dirt. If the installation is unattended or hard to reach, the same GC300 is available with an automatic or differential-pressure drain instead - just ask for the equivalent model code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.