The AirTAC GC30010MF2G AirTAC F.R.L. Unit, G3/8, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC30010MF2G is a three-piece AirTAC F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation unit. The filter removes water and particulate down to 40 um, the regulator holds a steady downstream pressure adjustable from 0.05 to 0.9 MPa (7-130 psi), and the lubricator adds oil mist for downstream air tools and actuators. This configuration has a G3/8 (BSPP) port, a manual drain on the filter bowl, a square pressure gauge scaled in psi, and a mounting bracket included. The maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). The bowls on this 300 size are polycarbonate (PC).
This is a genuine AirTAC part. The GC family is available in 200, 300, 400 and 600 sizes with port sizes from 1/8 to 1 inch, and options including automatic or differential-pressure drains, a 5 um filter element (code W), gauge scale in MPa, psi or bar, and G or NPT threads in place of the PT standard. Published flow data appears as curves rather than a single rating, so we confirm flow and datasheet figures on request.
| Model | GC30010MF2G AirTAC F.R.L. Unit, G3/8, Manual Drain |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 40 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to a pneumatic press or clamping station, where clean dry air protects valves and cylinders and steady regulated pressure keeps cycle force consistent.
Supplying air to packaging and cartoning machines with air cylinders and air-driven grippers, where the lubricator keeps seals and moving parts running and the 40 um filter stops debris reaching the valves.
Conditioning the air feed to a bench assembly station running air impact drivers and nutrunners, with the square psi gauge letting operators set and check working pressure at a glance.
Start with the size and port: the 300 size carries a G3/8 port, and stepping up to 400 or 600 gives larger ports and more flow capacity, while 200 suits smaller lines. Choose the drain type for the filter bowl: manual drain (as fitted here) needs periodic draining by hand, automatic drain handles condensate on its own, and differential-pressure drain is the default. The 40 um element is standard; specify the W code for a 5 um element where finer filtration is needed. The embedded square gauge is standard with a psi scale on this unit; MPa or bar scales and an external round gauge are options. Thread is G (BSPP) on this model; PT is the standard and NPT is an order option. A mounting bracket is included.
Flow for this family is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the flow and sizing from the datasheet on request.
The M in the code GC30010MF2G specifies a manual drain on the filter bowl, which means condensate is drained by hand at intervals. If you prefer the bowl to discharge condensate automatically, the A code gives an automatic drain, and the default blank code gives a differential-pressure drain. The regulator adjustment range also differs: with manual drain it is 0.05-0.9 MPa (7-130 psi), while with automatic or differential-pressure drain it is 0.15-0.9 MPa (20-130 psi).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.