The AirTAC GC30010MF2W AirTAC F.R.L. Unit 3/8 in PT, 5 um, Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC30010MF2W is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator, set up as one air-preparation station for compressed air. This 300-size unit is built for 3/8 in PT ports and carries the fine 5 um filter element (code W) instead of the standard 40 um, a manual drain on the filter bowl, and the standard regulator with an adjustment range of 0.05-0.9 MPa (7-130 psi). The embedded square gauge reads in psi, the bowls are PC (polycarbonate), and a mounting bracket is included.
This is a genuine AirTAC part. The GC line is available in sizes 200, 300, 400 and 600, with port options from 1/8 in to 1 in, PT as the standard thread and G or NPT as catalogue options, a choice of 40 um or 5 um filtration, manual, automatic or differential-pressure drains, and gauge scales in MPa, psi or bar. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC30010MF2W AirTAC F.R.L. Unit 3/8 in PT, 5 um, Manual Drain |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to carton-sealing and case-erector cylinders on a packaging line, with the 5 um element protecting downstream valves from fine particulate.
Supplies a bench-mounted pneumatic press or clamping fixture with clean, pressure-regulated, oil-misted air, the psi square gauge letting operators set and check working pressure at a glance.
Prepares air for conveyor diverters and stopper cylinders in a distribution centre, where the manual drain suits a station attended during shift checks and the lubricator keeps actuator seals conditioned.
Start with the port and size step: 300 size covers 3/8 in PT here, while 200, 400 and 600 step the port and flow capacity up or down - match the step to the air demand of the circuit rather than oversizing blindly. Choose the drain: manual (as on this model) means someone opens the drain periodically; automatic or differential-pressure drains suit unattended installations. Pick 40 um for general protection or 5 um, as fitted here, where finer particle removal matters downstream. Select the gauge scale (MPa, psi or bar) and the thread: PT is standard, with G (BSPP) and NPT orderable as options. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote one number. Tell us your working pressure and air demand and we will confirm the sizing from the datasheet curves before you order.
The M in the code means the filter bowl drains manually: an operator opens the drain during routine checks. It suits attended stations and keeps the bowl simple. If the unit will run unattended, the same 300-size combination is available with an automatic (A) or differential-pressure (blank) drain instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.