The AirTAC GC30010MF2WG AirTAC F.R.L. Combination, G3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC30010MF2WG is a three-piece AirTAC GC-series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This configuration is built around a G3/8 (BSPP) port on the GC300 size, with a 5 um filter element (the finer of the two catalogue grades) for cleaner air, a manual drain on the filter bowl, a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi), and an embedded square pressure gauge scaled in psi. The filter and lubricator bowls are polycarbonate, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and is ordered with your choice of drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um optional), gauge scale (MPa, psi or bar), thread (PT standard, with G and NPT as catalogue options), and reverse/check valve. Rated flow is published as curves rather than a single figure, so ask us to confirm the datasheet numbers for your application before ordering.
| Model | GC30010MF2WG AirTAC F.R.L. Combination, G3/8 |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-10 filter, GR300-10 regulator and GL300-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT3/8" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-10 |
| Build order | Filter → regulator → lubricator |
Point-of-use air prep at assembly stations: the filter removes water and particles down to 5 um, the regulator holds a steady set pressure for hand tools and actuators, and the lubricator mists oil into the tool air supply.
Feeding pneumatic cylinders on a carton-forming or case-packing conveyor, where a stable regulated pressure keeps stroke timing consistent and the lubricator extends cylinder and valve service life.
Supplying clamps, vices and swing cylinders on CNC machining cells: the 5 um element protects precision valves from contamination, and the psi-scaled gauge lets operators verify set pressure at a glance.
Start with the port and size: the GC300 carries a 3/8 inch port, and the step up or down through sizes 200, 300, 400 and 600 changes both the port and the air capacity, so match the size to the flow your line actually needs. Then set the options that matter day to day: the drain on the filter bowl (manual, as on this unit, versus automatic or differential-pressure), the filter grade (40 um standard or 5 um for finer protection), the gauge scale (MPa, psi or bar), and the thread - PT is the standard, with G (BSPP) and NPT available as catalogue options. A bracket is included; a reverse/check valve can be specified if needed.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated number, so we do not quote a rated flow figure here. Tell us your application and we will confirm the correct size and configuration against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-10 regulator with a GF300-10 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not state a rated flow, Cv or SCFM number here. Send us your application details and we will confirm the datasheet flow data for the GC300 at your operating conditions before you order.
The M in the code specifies a manual drain on the filter bowl: condensate is emptied by hand, which suits installations checked as part of a routine. If you prefer the bowl to discharge automatically or on differential pressure, the same GC300 in G3/8 is available with those drain codes instead - just tell us when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.