The AirTAC GC30015F2WG AirTAC F.R.L. Combination, G1/2, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1/2" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC30015F2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 300-size unit for 1/2 in lines. The filter element is the fine 5 um grade (code W), removing water and particulate ahead of the regulator, and the bowl drains by differential pressure, so no manual draining routine is required in normal operation. The regulator is the standard type with an embedded square gauge scaled in psi, and the lubricator meters oil mist into the downstream air. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port options, filter grade 40 um standard or 5 um (W), drain type, gauge scale and thread (PT standard; G and NPT as order options) selected per code. Flow is published as curves rather than a single rated figure, so we confirm flow and datasheet figures on request before you order.
| Model | GC30015F2WG AirTAC F.R.L. Combination, G1/2, 5 um |
|---|---|
| Series | GC300 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1/2" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC300 | G-series F.R.L. combination, 300 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF300-15 filter, GR300-15 regulator and GL300-15 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC300 · PT1/2" · 5 µm |
|---|---|
| One size down | GC200 |
| One size up | GC400 |
| Two-unit equivalent | GFC300-15 |
| Build order | Filter → regulator → lubricator |
Feeding clean, regulated and lubricated air to the cylinders and grippers on a carton-forming or wrapping line, with the 5 um element protecting fine sealing edges from particulate and condensed water.
Supplying the air actuators that raise, divert and stop product on a conveyor line, where the regulator holds a steady setpoint and the lubricator keeps cylinder seals working over long shifts.
Conditioning the air for pneumatic clamps and presses at an assembly bench: filtered to 5 um, regulated to the fixture's setpoint and lubricated so the clamping cylinders cycle reliably.
This code fixes a 300-size unit on a 1/2 in port with G thread, 5 um filtration, differential-pressure drain, standard regulator and a square gauge in psi. Step up or down a size (200/300/400/600) when your line port or air demand calls for it - larger sizes carry larger ports and more flow capacity. Choose the 5 um element (W) when downstream valves and cylinders need finer protection than the 40 um standard; choose the standard grade where coarser pre-filtration is acceptable. Drain choice is differential-pressure here (the default); automatic (A) and manual (M) variants exist if your installation prefers them. Thread is G (BSPP) on this code; PT is the standard and NPT can be ordered. A mounting bracket is included.
Because flow is published as curves and not as a single rating, ask us to confirm sizing of this unit against your application's air consumption before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR300-15 regulator with a GF300-15 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and air consumption and we will confirm the flow from the datasheet on request before you order.
The W in the code GC30015F2WG selects the optional 5 um element; 40 um is the standard grade. Choose 5 um where downstream valves and cylinders need finer protection, or order the code without W for the 40 um standard element.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.