The AirTAC GC40010MC2G AirTAC F.R.L. Combination, G3/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/8" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC40010MC2G is an AirTAC GC400 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator supplied as one set. This configuration is sized for G3/8 (3/8 in) ports with G thread, carries a 40 um filter element, and uses a manual drain on the filter bowl, so an operator opens the drain at intervals to release collected water. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and a round external gauge graduated in psi is fitted so the set downstream pressure can be read at a glance. The bowls on this 400 size are polycarbonate (PC), and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600, with ports from 1/8 in to 1 in, G or NPT thread alternatives, a 5 um filter element (code W), automatic or differential-pressure drain options, and gauge scales in MPa, psi or bar. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC40010MC2G AirTAC F.R.L. Combination, G3/8 |
|---|---|
| Series | GC400 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/8" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC400 | G-series F.R.L. combination, 400 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF400-10 filter, GR400-10 regulator and GL400-10 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC400 · PT3/8" · 40 µm |
|---|---|
| One size down | GC300 |
| One size up | GC600 |
| Two-unit equivalent | GFC400-10 |
| Build order | Filter → regulator → lubricator |
Filtered, regulated and lubricated air for impact wrenches, grinders and other air tools at machining and maintenance benches, with the fitted psi gauge letting operators set tool supply pressure precisely.
Supplies clean, moisture-reduced and oil-misted air to pneumatic cylinders and grippers on bottling and filling lines, with the regulator holding a steady set pressure as line demand varies.
Keeps the air feeding diverter and pusher cylinders on packaging conveyors free of water and particulate while carrying oil mist to the actuators downstream.
The real choices in this series are decodable from the code. Step up or down in size (200/300/400/600) to match the port and the flow your line needs, remembering that larger sizes carry larger ports and more flow. Choose the drain: manual (this unit, code M) needs periodic operator attention, automatic drains continuously, and the default differential-pressure drain bleeds as the pressure drop builds. Filter grade is 40 um as standard; specify W for 5 um where finer particulate removal matters. Gauge scale (MPa, psi or bar) and round vs embedded square gauge are selectable, and thread can be PT (the standard), G or NPT to order. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR400-10 regulator with a GF400-10 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Ask us to confirm the flow and datasheet figures for the GC400 at G3/8 against your application, and we will send them on request.
The M in GC40010MC2G means the filter bowl has a manual drain: an operator opens it periodically to release collected condensate. If you prefer unattended operation, the same series is available with an automatic drain (code A) or the default differential-pressure drain - just ask and we will confirm the equivalent model.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.