The AirTAC GC60020ALF2G AirTAC F.R.L. Combination, G3/4 (G) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60020ALF2G is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one compressed-air treatment set. This size 600 unit has a 3/4 in port with G (BSPP) thread. The filter element is the standard 40 um grade and carries an automatic drain, so accumulated condensate is expelled without manual attention. The regulator is the low-pressure type, and the fitted square gauge reads in psi so the set pressure can be seen and adjusted at a glance. At size 600 the bowls are aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and with choices of thread (PT standard, G or NPT to order), drain type (differential-pressure, automatic or manual), filter grade (40 um standard, 5 um optional), gauge scale (MPa, psi or bar) and standard or low-pressure regulation. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GC60020ALF2G AirTAC F.R.L. Combination, G3/4 (G) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeding impact wrenches, nut runners and air ratchets on a vehicle assembly line, where the filter removes water and swarf, the low-pressure regulator holds a steady set pressure, and the lubricator delivers oil mist to keep the tools running.
Supplying pick-and-place cylinders and gripper actuators on a carton-packing conveyor, with the automatic drain clearing condensate from the bowl and the square psi gauge letting the line technician verify set pressure at a glance.
A drop point at a CNC machine shop bench serving grinders, drills and blow-off guns, where the 40 um filter protects the tools, the regulator sets the working pressure and the lubricator mists oil into the tool air supply.
Start with the port and size step: this unit is size 600 with a 3/4 in port, the largest step in the range, which suits lines with the highest air demand - match it against your consumption before ordering. Choose the drain type for the filter bowl: this configuration has an automatic drain, while differential-pressure (default) and manual drains are also available in the series. Filter grade is 40 um standard; specify code W for the 5 um element if downstream equipment needs finer filtration. The regulator here is the low-pressure type - confirm its adjustment range with us, as the exact figure is not published. Gauge scale is selectable (MPa, psi or bar); this unit is fitted with a square gauge reading psi. Thread is G (BSPP) on this model; PT is the standard thread and G or NPT are order options. A mounting bracket is included.
One honest note on sizing: AirTAC publishes flow for this series as curves, not as a single rated number, so we cannot quote a rated flow figure. Send us your application details and we will confirm the flow and datasheet figures against your requirement before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your working pressure and air consumption and we will confirm the flow from the datasheet for this exact unit before you order.
This unit's filter bowl has an automatic drain, which expels collected condensate without anyone opening the bowl. The GC series is also available with a differential-pressure drain (the default) or a manual drain, so you can choose the type that suits how the compressor room is attended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.