The AirTAC GC60020F2 AirTAC F.R.L. Combination, PT3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60020F2 is an AirTAC GC600 three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one 3-piece set. This configuration carries PT3/4 ports, the standard 40 um filter element, a differential-pressure drain on the filter bowl, and a standard regulator with an embedded square gauge scaled in psi. At size 600 the bowls are aluminium alloy, and the set includes a mounting bracket.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port options, drain types, 5 um filtration (code W), gauge scales and G or NPT threads as catalogue options. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC60020F2 AirTAC F.R.L. Combination, PT3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to clamps, tool-changers and pneumatic actuators on CNC machining centres, with the psi gauge giving operators a direct read on set line pressure.
Conditions the air feeding carton-forming and case-packing conveyor cylinders: the 40 um element stops particulate carryover, the regulator holds consistent cylinder pressure, and the lubricator mists oil for seal life.
Installed at the drop point supplying weaving looms and air-jet accessories, where continuous duty demands water and dirt removal plus steady regulation across a full shift.
Size 600 with PT3/4 ports is the largest step in the GC range, so start there when your line's air demand sits above what 1/2 in and smaller ports serve; step down to GC400, GC300 or GC200 if your flow requirement is lower. The differential-pressure drain on this unit bleeds condensate automatically as pressure drops across the filter - choose the automatic drain (code A) if you want positive timed purging, or manual drain if the bowl will be checked routinely. The standard 40 um element suits general plant air; specify the W code for 5 um where downstream valves and cylinders need finer protection. The fitted square gauge reads in psi; MPa and bar scales are available, and an external round gauge is optional. PT thread is standard on this model - order the G (BSPP) or NPT variant if your piping uses those standards.
Because AirTAC publishes flow only as curves and not as a single rated figure, send us your application's air demand and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as performance curves rather than a single rated figure, so we do not quote one number here. Send us your application's air demand and operating pressure and we will confirm the sizing from the datasheet on request before you order.
This configuration uses the differential-pressure drain, the GC series default: condensate collected in the filter bowl is discharged automatically when the pressure drop across the filter element reaches the drain's threshold. If you prefer a positive automatic purge or a manual drain bowl, those are catalogue drain options on the GC family - tell us which you need and we will confirm the right code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.