The AirTAC GC60020F2WG AirTAC F.R.L. Combination, G3/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60020F2WG is a three-piece AirTAC F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set. This configuration is size 600 with a G3/4 (3/4 inch) G-thread port, fitted with a 5 um filter element, a differential-pressure drain on the filter bowl, a standard regulator with an embedded square gauge reading in psi, and the mounting bracket included. It filters water and particulate from compressed air, holds a stable downstream pressure, and adds oil mist for air-tool lubrication in a single installation.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 inch to 1 inch, a choice of PT, G or NPT thread, 40 um or 5 um filtration, automatic, manual or differential-pressure drains, and MPa, psi or bar gauge scales. Maximum working pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing). Flow is published as curves rather than a single rating, so ask us and we will confirm the datasheet figures for your application.
| Model | GC60020F2WG AirTAC F.R.L. Combination, G3/4, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds spray guns and air-fed respirators on a body-shop line: the 5 um element strips water and grit, the regulator holds a steady gun pressure, and the lubricator is set to serve air tools on the same drop where oiling is wanted.
Conditions the shop-air drop feeding a machining centre's pneumatic tool-changer and clamps: clean, regulated air protects the valves, and the lubricator keeps the actuated tooling running smoothly.
Serves the cylinders and air cylinders that divert, clamp and seal packs on a bottling or cartoning conveyor, where the 3/4 inch port carries the whole line's demand and the psi gauge lets operators check set pressure at a glance.
Size 600 with a 3/4 inch port suits lines with substantial air demand; step down to 200/300/400 for lighter circuits. The 5 um element (code W) is the finer of the two published grades, chosen when downstream valves and cylinders need cleaner air than the 40 um standard element provides. The differential-pressure drain bleeds the bowl automatically as the pressure across the element rises, with no operator intervention. The embedded square gauge in psi covers the standard regulation range of 0.15-0.9 MPa (20-130 psi); an external round gauge and MPa or bar scales are available if preferred. The G (BSPP) thread here is the catalogue option - PT is the standard thread and NPT can also be ordered. Flow is published as curves, not a single rating, so send us your demand figures and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a number here. Send us your line pressure and air demand and we will confirm the datasheet flow curve for this 3/4 inch size before you order.
The W in the code GC60020F2WG selects the optional 5 um element; the catalogue standard is 40 um. The finer grade suits downstream valves, cylinders and tools that need cleaner air. The drain on this unit is differential-pressure, so the bowl bleeds condensate automatically as the element loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.