The AirTAC GC60020LC2W AirTAC F.R.L. Set PT3/4, 5 um, psi Gauge is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled into one air-preparation set. This GC600 configuration is sized for 3/4 in PT piping and carries the W filter element, which removes water and particulate down to 5 um instead of the standard 40 um. The differential-pressure drain discharges collected condensate automatically when the pressure differential across the bowl opens it, so no routine manual draining is required. The regulator is the low-pressure type, and the set is fitted with an external round gauge reading in psi. At size 600 the bowls are aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC range spans sizes 200, 300, 400 and 600, with port sizes from 1/8 to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um standard or 5 um (W) filtration, gauge scales in MPa, psi or bar, and G (BSPP) or NPT threads as order options. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GC60020LC2W AirTAC F.R.L. Set PT3/4, 5 um, psi Gauge |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Conditions the air feeding clamps, tool-change cylinders and part-ejection jets on a CNC machining cell: the 5 um element strips fine water and particulate before the valves, the low-pressure regulator sets circuit pressure and the lubricator mists oil to the actuation side.
Prepares air for the grip, press and transfer cylinders along an automotive trim line. The low-pressure regulator type suits circuits regulated at lower pressures, the differential-pressure drain keeps condensate off the line automatically, and the 3/4 in PT port serves a main drop.
Feeds the case-erecting cylinders and gripper actuators on a packaging conveyor. Filtered, regulated and lubricated air in one set keeps the moving pneumatics supplied, with the round psi gauge giving operators a local pressure readout at the station.
Work through the real, decodable choices before ordering. Size 600 with a 3/4 in PT port is the step for lines with heavier air demand; the 200-400 sizes cover lighter circuits. Filtration here is 5 um (code W); the standard element is 40 um if finer filtration is not needed. The drain is differential-pressure, which discharges condensate automatically on a pressure differential, while automatic (A) and manual (M) drains are alternatives in the range. The gauge on this model is the external round type reading psi; an embedded square gauge is standard on the range and MPa or bar scales are available. Thread is PT as the standard, with G (BSPP) and NPT offered to order, and a bracket is included. Because AirTAC publishes flow only as curves, not a single rated figure, send us your flow requirement and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC range as curves rather than a single rated figure, so we do not quote a number here. Tell us your flow demand and operating pressure and we will confirm the sizing from the datasheet on request before you order.
The L in GC60020LC2W marks the low-pressure regulator type, intended for circuits regulated at lower pressures. The exact adjustment range for this variant is not published in the standard table, so ask us to confirm it on request. Max inlet pressure remains 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.