The AirTAC GC60020LF2W AirTAC F.R.L. Combination, PT3/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60020LF2W is an AirTAC GC series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-treatment set. This size 600 configuration has PT3/4 ports, a 5 um filter element (code W, finer than the 40 um standard), a differential-pressure drain on the filter bowl, a low-pressure type regulator with a fitted embedded square gauge reading in psi, and an oil-mist lubricator for downstream air tools. At size 600 the filter bowl is aluminium alloy, and the set includes a mounting bracket.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, drain types, filter grades, gauge scales and thread options, so a configuration can be matched to the line it serves. Rated flow for this series is published as curves rather than a single figure; ask us and we will confirm the datasheet figures for your application before you order.
| Model | GC60020LF2W AirTAC F.R.L. Combination, PT3/4, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds a body-shop spray booth's air drops where the filter element strips water and particulate ahead of the regulator and lubricator, protecting the finish line's air supply at the drop point.
Sits in the supply run to a bottling conveyor's pneumatic cylinders, giving the line filtered, regulated and lubricated air so the actuators and valves on the filler see treated air at a set pressure.
Installed as the main air-preparation set on a CNC machining centre's incoming air line, conditioning the supply before it reaches the machine's pneumatic tool-changer and clamping circuits.
Start with the port step: this unit is size 600 with PT3/4 ports, the largest in the GC range, so size up from 300/400 when the line's flow demand calls for it - we will confirm the flow curves against your consumption before ordering. This configuration carries the 5 um element (W); the 40 um standard element is the usual choice for general supply, with 5 um for finer protection. The drain here is differential-pressure (the default), which discharges as the pressure differential across the element builds; automatic (A) and manual (M) drains are orderable alternatives. The regulator in this code is the low-pressure type; its exact adjustment range is not published in the material we hold, so confirm it with us if your set pressure sits near the top of a low-pressure band. The fitted square gauge reads psi; MPa and bar scales and an external round gauge are options. Thread is PT as standard, with G (BSPP) and NPT available to order as specifications.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line's flow demand and operating pressure and we will confirm the datasheet curve figures for this exact unit before you order.
The W in the code selects the 5 um filter element instead of the 40 um standard, for finer particle removal ahead of the regulator and lubricator. The L selects the low-pressure type regulator; its exact adjustment range is not published in our current material, so confirm it with us if your set pressure matters to the application.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.