The AirTAC GC60020MC2WG AirTAC F.R.L. Unit, G3/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC60020MC2WG is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembly: a separate filter, regulator and lubricator for 3/4 in lines. This configuration is built with a 5 um filter element (the finer of the two catalogue grades), a manual drain on the filter bowl, a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi), and an external round gauge reading in psi. Because this is the 600 size, the pressure bowls are aluminium alloy, and the unit carries a mounting bracket.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include automatic, manual or differential-pressure drains, a 40 um or 5 um element, square or round gauges with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC60020MC2WG AirTAC F.R.L. Unit, G3/4, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeding filtered, regulated and lubricated air to the tool-changer and clamping circuits of a machining centre, where the 5 um element helps protect precision valves on a 3/4 in main.
Conditioning shop air at the drop for paint-line equipment: the regulator holds a stable setting for spray and conveyance actuators while the lubricator mists air-driven tooling downstream.
Supplying case packers and conveyor diverters on a bottling line, where the combination keeps water and particles out of cylinders, holds a set pressure and lubricates the actuators in service.
Step up or down by size (200/300/400/600) to match the port and the flow your line needs - this 600 unit takes a 3/4 in port in G thread (PT is the standard thread; G and NPT are order options). The 5 um element suits air that feeds sensitive components; the 40 um standard grade is fine for general supply. A manual drain means an operator opens the bowl drain during checks; choose automatic or differential-pressure drain if you cannot guarantee that routine. The round psi gauge is fitted here; embedded square gauges with MPa, psi or bar scales are the alternative.
Flow for this series is published as curves, not a single rated number, so we do not quote a figure here. Send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as characteristic curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and the flow your equipment needs, and we will confirm the sizing against the datasheet before you order.
The M in the code selects a manual drain: an operator opens the filter bowl drain during inspection rounds instead of relying on an automatic or differential-pressure drain. The W selects the 5 um element, the finer of the two grades (40 um is standard), which suits air feeding sensitive valves and instruments. If unattended drainage matters on your line, ask us about the automatic-drain version of the same unit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.