The AirTAC GC60020MF2G AirTAC F.R.L. Combination, G3/4 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60020MF2G is a three-piece AirTAC F.R.L. combination for 3/4 in (G3/4) compressed-air lines, bringing filtration, pressure regulation and oil-mist lubrication together as one coordinated set. The filter stage removes water and particulate down to the standard 40 um grade, the manual drain lets an operator bleed accumulated condensate from the bowl on a chosen schedule, and the lubricator meters oil mist downstream to keep air tools and cylinders running smoothly. The regulator is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the fitted embedded square gauge reads in psi so setpoints can be checked at a glance.
This is a genuine AirTAC part in the GC series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in and a choice of PT, G or NPT thread, drain type, filter grade and gauge scale. At size 600 the bowls are aluminium alloy for added robustness. Flow figures for this series are published as curves rather than a single rating, so ask us and we will confirm the datasheet numbers against your application.
| Model | GC60020MF2G AirTAC F.R.L. Combination, G3/4 |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeding a 3/4 in branch line that supplies impact wrenches and nut runners on an assembly line: the set cleans the air, holds a steady regulated pressure and oils the tools downstream.
Conditioning the air feeding pneumatic cylinders on a carton-forming and palletising line, where clean, regulated, lubricated air keeps stroke speeds consistent through long shifts.
Supplying heavy-duty vehicle service bays where air impact guns, tyre chucks and lift controls all draw from one 3/4 in drop, protected and lubricated by a single F.R.L. set.
Size 600 with a G3/4 port sits at the top of the GC range, so step up or down through 200/300/400/600 to match the port and flow your line needs. Choose the drain to suit maintenance habits: manual (as here) means an operator drains the bowl, while automatic and differential-pressure options drain themselves. The 40 um grade is the standard element; specify W for the 5 um grade if finer filtration is required. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are also available. Thread is G here, with PT as the standard and NPT as an order option, and a mounting bracket is included.
Because flow for this series is published as curves rather than a single rated figure, send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a number here. Tell us your line pressure and the air demand of your equipment and we will confirm the flow figures from the datasheet for this exact 3/4 in unit before you order.
The M in the code selects the manual drain on the filter bowl: an operator opens it to release collected condensate, which suits installations visited daily or where drains are checked as part of a routine. Automatic and differential-pressure drain options are available in the same series if you would rather not rely on manual bleeding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.