The AirTAC GC60020MF2GK AirTAC F.R.L. Combination, G3/4 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 40 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The AirTAC GC60020MF2GK is a three-piece F.R.L. combination that filters, regulates and lubricates compressed air in one assembly: a separate filter with drain bowl, a pressure regulator and an oil-mist lubricator. This 600-size unit carries a G3/4 (3/4 in) port with G (BSPP) thread, a 40 um standard filter element and a manual drain, so condensate is released by operator action rather than automatically. Regulation is the standard type with an adjustment range of 0.05-0.9 MPa (7-130 psi), and the fitted square gauge reads in psi. A reverse/check valve is fitted, and the mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi), with an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is offered in sizes 200, 300, 400 and 600 with a choice of ports, PT/G/NPT threads, manual, automatic or differential-pressure drains, 40 um or 5 um (W) filter grades, and square or round gauges scaled in MPa, psi or bar. Flow is published as curves rather than a single rated figure, so we confirm flow and other datasheet figures on request.
| Model | GC60020MF2GK AirTAC F.R.L. Combination, G3/4 Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to spray booths and air-driven paint equipment on a body shop line, where water, particulate and consistent oil misting protect finish quality and tool life.
Installed at the drop to a machining cell to clean the shop air, hold a set working pressure for pneumatic clamps and tool changers, and mist-lubricate the air cylinders doing the work.
Conditions the air feeding conveyor stoppers, case sealers and wrapping heads on a packaging line, keeping actuators running smoothly through a full shift at a stable set pressure.
Size and port set the capacity ceiling: the 600 size with its G3/4 (3/4 in) port suits the largest air demands in the range, but the right step still depends on the flow your line needs - ask us to confirm sizing against the published curves before ordering. Drain choice matters: this unit has a manual drain, which suits attended installations; automatic (A) or differential-pressure drains are available for unattended duty. Filter grade is the 40 um standard element; specify the 5 um W grade where downstream equipment needs finer filtration. The fitted square gauge reads psi; MPa or bar scales and an external round gauge are options. Thread is G (BSPP) here, with PT standard and NPT available to order. A bracket is included, and the reverse/check valve (K) is fitted on this code.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number. Send us your line pressure, set pressure and air demand and we will confirm the sizing against the datasheet curves on request before you order.
The M in the code means the filter bowl drain is operated by hand, which suits installations where someone checks the unit regularly. If the unit will sit unattended, the GC series is also available with an automatic (A) or differential-pressure drain - just specify the drain code when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.