The AirTAC GC60020MF2WG AirTAC F.R.L. Unit G3/4 5 um Manual Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60020MF2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set for compressed air. This size 600 configuration carries 3/4 in G-thread ports, a 5 um filter element (the finer of the two catalogue grades), a manual drain on the filter bowl, a standard regulator adjustable from 0.05 to 0.9 MPa (7-130 psi), and an embedded square gauge reading in psi. At size 600 the filter bowl is aluminium alloy. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of port sizes, thread options (PT standard, G and NPT to order), drain types, filter grades and gauge scales, so a set can be matched to the line it serves. Because flow is published as curves rather than a single rated figure, we confirm the datasheet and sizing figures for your application on request.
| Model | GC60020MF2WG AirTAC F.R.L. Unit G3/4 5 um Manual Drain |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Installed at the 3/4 in main drop feeding a CNC machining cell, the set removes water and 5 um particulate, holds a steady regulated pressure for the cell's air tools and actuators, and carries oil mist to lubricate downstream equipment.
Mounted on the supply header of a packaging or palletising line, the combination conditions the air serving cylinders, grippers and air-operated carton sealers, with the psi gauge giving operators a visible setpoint and the manual drain cleared during shift checks.
Fitted on the shop-air feed in a commercial-vehicle service bay, the unit delivers filtered, regulated and lubricated air to impact wrenches, tyre chucks and lift controls, with the 5 um element protecting the tools used across the bays.
Start with the port step: size 600 with G3/4 ports sits at the top of the GC range (200/300/400/600), so choose it where the line's pipe work and expected air demand call for 3/4 in connections; the published flow curves, not a single rating, decide whether the size is right, so ask us to confirm sizing before ordering. This unit is already configured with the 5 um element (W code) instead of the 40 um standard - keep 5 um where downstream valves and cylinders need finer protection, and note the manual drain means an operator opens the bowl drain rather than relying on an automatic or differential-pressure arrangement. The square gauge reads psi; MPa and bar scales are the other catalogue options, and an external round gauge is available. Thread here is G (BSPP); PT is the standard and NPT is an order option. Mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for this series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Send us your application details and we will confirm the flow and sizing data from the datasheet on request before you order.
Both are decoded from the model code. The M position is the manual drain: an operator opens the filter bowl drain to discharge collected water, instead of an automatic or differential-pressure drain. The W position selects the 5 um filter element, the finer of the two catalogue grades (40 um is standard), for better protection of downstream valves and cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.