The AirTAC GC60020MF2WGK AirTAC F.R.L. Combination, G3/4 Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60020MF2WGK is a genuine AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one conditioning set. This size 600 unit carries a G3/4 (3/4 in) G-thread port, filters to 5 um (the fine W grade, versus the 40 um standard), drains by hand via the manual drain, and regulates between 0.05 and 0.9 MPa (7-130 psi). A square psi gauge is fitted, a reverse/check valve is included, and the bowls on this 600 size are aluminium alloy. Maximum inlet pressure is 1.0 MPa (145 psi); working temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GC range, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, drain, filter-grade, gauge-scale and thread options. Flow for this unit is published as curves rather than a single rated figure, so ask us and we will confirm the datasheet figures for your application on request.
| Model | GC60020MF2WGK AirTAC F.R.L. Combination, G3/4 Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.05 - 0.9 MPa (7 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
Installed at the distribution header of a manufacturing plant, this 3/4 in F.R.L. set cleans, regulates and lubricates the compressed air feeding an entire production hall's tooling circuits.
Mounted upstream of the cylinder and actuator banks on a packaging or conveyor line, it removes water and 5 um particles, holds a steady regulated pressure and keeps oil-mist lubrication on the moving seals.
Fitted ahead of large pneumatic presses, clamps or material-handling rigs, the combination protects valves and cylinders from condensate and debris while the check valve holds the set pressure if supply dips.
Choose the size and port step against the air demand of the line: this is the largest GC size (600) with a 3/4 in port, intended for higher-flow circuits, and the G (BSPP) thread must match your piping - PT is the standard thread, with G and NPT available as order options. This configuration already fixes several choices: 5 um filtration for cleaner downstream air, a manual drain you operate by hand, a square gauge reading in psi, and a reverse/check valve holding downstream pressure if the supply drops. The mounting bracket is included. Because flow is published as curves rather than a single rating, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so no single flow number is quoted here. Send us your application details and we will confirm the datasheet flow figures for this 3/4 in unit on request.
This configuration is coded M (manual drain) and W (5 um filter grade). The manual drain is emptied by hand, which suits installations checked as part of a routine; the 5 um element is the finer option versus the 40 um standard, for cleaner air to sensitive downstream equipment. The square gauge reads in psi, and the G (BSPP) thread is the order option - PT is the standard thread if you prefer it.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.