The AirTAC GC60020MLF2WG AirTAC F.R.L. Combination, G3/4, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT3/4" ports, a 5 µm element, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi).
The GC60020MLF2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one set. This configuration is built for 3/4 in G-thread ports, carries the fine 5 um filter element (code W), uses a manual drain on the filter bowl, and is the low-pressure regulator type. A square pressure gauge scaled in psi is fitted, and the reverse/check valve is not fitted. Because this is size 600, the filter bowl is aluminium alloy rather than polycarbonate.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with a choice of port sizes, PT standard thread (G and NPT available as order options), manual, automatic or differential-pressure drains, 40 um standard or 5 um fine filtration, gauge scale choices and low-pressure regulator variants. Flow figures are published as curves rather than a single rating, so we confirm the datasheet and sizing figures for your application on request.
| Model | GC60020MLF2WG AirTAC F.R.L. Combination, G3/4, 5 um |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT3/4" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-20 filter, GR600-20 regulator and GL600-20 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT3/4" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-20 |
| Build order | Filter → regulator → lubricator |
A 3/4 in filtered, regulated and lubricated supply point for a production hall's ring main, feeding multiple downstream drops from one conditioning station.
Conditioning the air feeding cylinder-driven conveyor gates, pushers and palletising clamps, where the 5 um element protects valve spools and the lubricator keeps actuator seals working.
Supplying clamping fixtures and power chucks on machining lines, where stable low-pressure regulation and oil-mist lubrication keep holding force consistent through a long shift.
Start with the port step: this unit is the size 600 body on 3/4 in G-thread ports, the largest step in the GC range - match it to your line's pipe size and expected air demand, and ask us to confirm the flow curve against your consumption before ordering. The 5 um element (W code) suits downstream equipment that needs finer particulate removal than the 40 um standard; the manual drain means an operator opens the bowl drain during checks rather than relying on an automatic or differential-pressure mechanism. The regulator here is the low-pressure type - confirm its exact adjustment range with us, as it differs from the standard type. The fitted square gauge reads in psi; MPa and bar scales, an external round gauge, and PT or NPT threads are orderable alternatives. A mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-20 regulator with a GF600-20 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and air consumption and we will confirm the flow curve and datasheet figures for this exact 3/4 in configuration on request.
The M code in this model specifies a manual drain: condensate collected in the aluminium alloy filter bowl is released by hand during routine checks, instead of via an automatic or differential-pressure drain. The L code marks the low-pressure regulator type; its exact adjustment range is not published in the same form as the standard type, so confirm it with us before ordering if your set pressure is critical.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.