The AirTAC GC60025AC2K AirTAC F.R.L. Combination, PT1 in Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025AC2K is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one air-preparation set. This configuration is the size 600 unit with a 1 in PT port, a 40 um filter element, an automatic drain on the filter bowl, a standard regulator adjustable from 0.15 to 0.9 MPa (20-130 psi), a round gauge reading in psi, and a reverse/check valve fitted. The aluminium alloy bowls suit this large-frame size, and the automatic drain expels collected condensate without manual attention.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, and options including a 5 um filter element (code W), manual or differential-pressure drain, gauge scale in MPa, psi or bar, G or NPT thread, and a reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC60025AC2K AirTAC F.R.L. Combination, PT1 in Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding a high-consumption assembly line off a 1 in plant-air drop: the set filters water and particulate, holds a set working pressure for the tools, and meters oil mist to the air-driven actuators and impact tools on the line.
Conditioning the air feeding cylinder-driven conveyors, fillers and case packers, where the automatic drain handles condensate between shifts and the check valve helps hold downstream pressure if the supply dips.
Supplying filtered, regulated and lubricated air to pneumatic clamps and tool-change cylinders on machining centres, with the psi gauge giving operators a direct reading of the clamping circuit pressure.
Size 600 with a 1 in PT port is the largest step in the GC range; step down through 200/300/400 if your line flow and port size are smaller, since the curves (available on request) show how flow varies by size. Drain choice matters: automatic drain suits unattended or hard-to-reach installations, manual drain suits supervised points, and differential-pressure drain is the catalogue default. Filter grade is 40 um as decoded here; specify 5 um (code W) where finer particulate removal is needed. The gauge is decoded as a round, psi-reading unit; embedded square gauges with MPa/psi/bar scales are the alternative. Thread is PT as standard, with G (BSPP) and NPT as order options, and the mounting bracket is included.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your working pressure and consumption and we will confirm the sizing against the datasheet curves on request before you order.
The A in the code GC60025AC2K decodes to an automatic drain, which expels collected condensate from the filter bowl without operator attention. The GC family also offers manual drain (code M) and differential-pressure drain (blank) as decodable alternatives, so you can order the drain type that matches how the installation is supervised.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.