The AirTAC GC60025AC2WG AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled in one unit, so it cleans compressed air of water and particulate, holds a set downstream pressure and adds oil mist for air tools and cylinders. This GC60025AC2WG is built on the largest 600 size with a G1 (1 in) G-thread port. It carries the W filter element (5 um), an automatic drain that expels collected condensate without manual attention, a standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range, and a round gauge reading in psi. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing). On the 600 size the filter bowl is aluminium alloy, and a mounting bracket is included.
This is a genuine AirTAC part. The GC series spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options that include manual or differential-pressure drains, a 40 um standard element instead of 5 um, square embedded or round external gauges with MPa, psi or bar scales, PT as standard thread with G and NPT as order options, and a reverse/check valve. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC60025AC2WG AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding cleaned, regulated and lubricated air to the tool-changer, clamps and pneumatic actuators on a machining centre, with the 5 um element guarding fine control valves on a high-demand 1 in line.
Supplying the stopper gates, pushers and lift cylinders along a bottling or packaging conveyor, where the automatic drain handles condensate on a line that runs unattended across shifts.
Conditioning the air at large-capacity drops feeding paint circulation pumps and air motors, removing water and particles ahead of the booth while the lubricator protects downstream air-driven equipment.
Start with the size and port: the 600 series steps up port and flow capacity through G1 (1 in), so match the size against the air demand of the circuit rather than the pipe alone. Choose the drain for how the unit will be tended: automatic (this model) suits installations that are not checked daily, manual drain suits attended stations, and the differential-pressure default drains only when the pressure drop across the element calls for it. Pick the filter grade: 40 um is the standard element and 5 um (code W, fitted here) protects finer downstream equipment. Select the gauge scale - MPa, psi or bar - and the gauge style, with the embedded square gauge standard and an external round gauge optional. Thread is PT as standard with G and NPT available to order; a bracket is included on this unit. Flow is published as curves, not a single rating, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a flow number on the page. Tell us your application and line conditions and we will confirm the relevant flow figures from the datasheet before you order.
The A in the code sets the automatic drain, which expels collected condensate from the filter bowl without anyone opening it - useful on lines that are not checked daily. The GC series is also available with a manual drain or the differential-pressure default, and on the 600 size the bowl is aluminium alloy.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.