The AirTAC GC60025AC2WK AirTAC F.R.L. Combination 1 in (PT1) is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025AC2WK is a three-piece AirTAC GC series F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply unit. This configuration is built around a PT1 (1 in) port for high-flow compressed-air lines, with a 5 um filter element (code W), an automatic drain on the filter bowl, and a standard regulator adjustable from 0.15-0.9 MPa (20-130 psi). The filter bowl on this size 600 unit is aluminium alloy, a round external gauge with a psi scale is fitted, a reverse/check valve is included, and the unit comes with a mounting bracket.
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and can be ordered with manual or differential-pressure drains, 40 um or 5 um filtration, different gauge scales (MPa, psi or bar), and G (BSPP) or NPT threads as order options. Flow figures for this series are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC60025AC2WK AirTAC F.R.L. Combination 1 in (PT1) |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding a large assembly hall's distribution main, where one conditioning point must remove water and particles, hold a steady working pressure for impact tools and actuators, and carry oil mist downstream to keep air tools lubricated through a full shift.
Conditioning the air feeding conveyor diverters, case packers and wrapper cylinders on a packaging line, where the 5 um element protects valve spools from particulate and the lubricator keeps cylinder seals running smoothly.
Supplying a fabrication shop's grinder, chisel and clamp circuits at a large-diameter takeoff, where the regulator holds a stable setting for consistent clamping force and the check valve helps hold downstream pressure if the supply dips.
Start with the port and size step: this unit is size 600 with a PT1 (1 in) port, the largest step in the GC range, so match it to the line diameter and the air demand of the equipment it feeds - we can check the published flow curves against your requirement before you order. The remaining choices are decodable from the code: drain type (automatic here, with manual and differential-pressure available), filter grade (5 um here, 40 um standard), gauge scale (psi here; MPa and bar also offered), thread (PT standard, G/NPT to order), and whether a reverse/check valve is fitted.
Because AirTAC publishes flow for this series only as curves and not as a single rated figure, we do not quote a flow number on the page. Send us your application details and we will confirm the correct size and configuration from the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not state a flow number on the page. Tell us your line size and air demand and we will confirm the sizing against the datasheet curves on request before you order.
The automatic drain (code A) discharges collected condensate from the filter bowl without anyone opening it, which suits unattended or high-humidity installations. The GC series can also be ordered with a manual drain or a differential-pressure drain, and the filter grade can be the standard 40 um element instead of the 5 um element fitted here - just ask for the alternative code when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.