The AirTAC GC60025AF2G AirTAC F.R.L. 1 in G Thread, Auto Drain is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025AF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled as one set, so compressed air is cleaned of water and particulate, held at a set working pressure, and carried with a fine oil mist to downstream equipment. This 600-size unit is fitted with a G1 (1 in) G-thread port, the largest port step in the G-series range. The filter element is the standard 40 um grade, the bowl drains automatically, and the regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi). An embedded square gauge with a psi scale is fitted so the set outlet pressure can be read directly.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600, with port sizes from 1/8 in up to 1 in, a choice of drain types (differential-pressure, automatic or manual), an optional 5 um filter grade (code W), gauge scale options, and G or NPT thread variants as order options. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GC60025AF2G AirTAC F.R.L. 1 in G Thread, Auto Drain |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Installed at the take-off point of a large plant air ring main, the three-unit set cleans, regulates and lubricates the supply feeding an entire work area, with the 1 in G-thread port matching the main line and the automatic drain handling condensate without daily attention.
Mounted on the frame of a carton-forming and conveyor line, the set supplies clean, pressure-stable and oil-misted air to the cylinders and air motors that index, clamp and move product along the line, with the psi gauge giving operators a visible set-point.
Fitted ahead of a large pneumatic press or clamping fixture, the combination protects the tool's valves and cylinders from water and swarf, holds a steady working pressure for repeatable clamping force, and keeps the tool's air lubricated over long production runs.
Start with the port and flow path: the 600 size carries the largest port in the G-series (1 in here, G thread), so match it to the main air line serving the machine or cell. Choose the drain to suit access: this unit has an automatic drain, which suits bowls mounted where regular manual draining is impractical; manual and differential-pressure drain versions are available in the family. The 40 um element is the standard grade; specify the W suffix if the application needs the 5 um option. The fitted square gauge reads in psi; MPa and bar scales are alternatives, and an external round gauge is optional.
Thread is G (BSPP) on this code; PT is the catalogue standard and NPT is also available as an order option, so confirm the thread your piping needs before ordering. A mounting bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your air demand before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so we do not quote a rated flow number. Send us your air demand and line details and we will confirm the sizing against the datasheet curves on request before you order.
The A in the code GC60025AF2G selects the automatic drain, which expels collected condensate from the filter bowl without anyone opening it - useful where the unit is mounted in a hard-to-reach spot. The GC family also offers manual and differential-pressure drain versions if you prefer a different arrangement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.