The AirTAC GC60025AF2GK AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 40 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC series is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled into one air-preparation set. This configuration is the size 600 frame with a G1 (1 in) port in G thread, fitted with an automatic drain that expels collected condensate without manual attention, a 40 um filter element, and an embedded square gauge reading in psi. A reverse/check valve is fitted, the bowls on the filter section are aluminium alloy at this size, and a mounting bracket is included.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600, with port options, drain types (differential-pressure, automatic or manual), a 5 um filter element option, gauge scale choices and thread variants (PT standard, with G and NPT as order options). Flow is published as curves rather than a single rated figure, so we confirm the datasheet figures for your application on request.
| Model | GC60025AF2GK AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 40 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds a 1 in branch line serving air impact wrenches and clamping fixtures at assembly stations, cleaning the air, holding a set working pressure and carrying oil mist to the tools.
Prepares the air supply for filler and capper cylinders on a beverage bottling line, removing water and particulate, stabilising regulator pressure and lubricating the actuators in service.
Conditions the shop-air feed to CNC machining centres and their pneumatic tool-changer circuits, protecting valves and cylinders from condensate while keeping regulated pressure steady.
Start with the size and port: the 600 frame with its 1 in port sits at the top of the GC range and suits lines with substantial air demand, while smaller frames (200/300/400) cover lighter circuits. Choose the drain to match maintenance practice: automatic drain (fitted here) suits unattended or hard-to-reach installations, manual drain suits stations checked daily, and differential-pressure drain is the standard default. The 40 um element fitted here is the standard grade; specify code W if the 5 um grade is needed. The embedded square gauge reads psi here; MPa and bar scales are also available, and an external round gauge is optional. Thread is G in this code, with PT standard and NPT orderable. A mounting bracket is included.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote one number. Tell us your application and we will confirm the relevant flow and datasheet figures on request before you order.
The GC combines a separate filter, regulator and lubricator, so it both cleans and regulates the air and adds oil mist for downstream tools and actuators; a two-unit set covers only filter-regulator plus lubricator in a different arrangement. The automatic drain fitted here expels collected condensate from the filter bowl on its own, which suits installations that are not checked every day.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.