The AirTAC GC60025AF2WG AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60025AF2WG is a three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one air-preparation set. This 600-size unit carries a G1 (1 in) port with G thread, and the filter section is fitted with an automatic drain and a 5 um filtering element (the W grade; 40 um is the series standard). The bowls on this size are aluminium alloy, the regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the embedded square gauge reads in psi. No reverse/check valve is fitted, and a mounting bracket is included.
This is a genuine AirTAC part from the GC combination family, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, a choice of differential-pressure, automatic or manual draining, 40 um or 5 um filtering, gauge scale options and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing figures for your application on request.
| Model | GC60025AF2WG AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeding spray booths and air-powered applicators on a vehicle paint line, where the 5 um element, pressure regulation and oil misting in one set keep the supply conditioned before it reaches the guns.
Conditioning the air feeding cylinders and actuators on carton-forming and case-sealing conveyors, with the lubricator metering oil mist to keep cylinder seals and valves running smoothly.
Serving as the main air-preparation set on a machine-tool air drop, where the regulator holds a steady setting for pneumatic clamping and tool-change circuits and the automatic drain handles condensate.
Work through the decodable choices in order. First, size and port: the 600 size with its 1 in G1 port is the largest step in the GC range, so match it against the air demand of the line it feeds; if your requirement sits below the 1 in step, sizes 200-400 with smaller ports are available. Second, drain type: this unit has an automatic drain (code A), which discharges collected condensate without manual intervention; manual and differential-pressure drains are the alternatives in the family. Third, filter grade: the W code here selects the 5 um element over the 40 um standard, the choice to make when downstream equipment needs finer particulate removal. You can also specify gauge scale (MPa, psi or bar - this unit is psi), thread form (PT is the series standard, with G and NPT as order options) and bracket preference.
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated number, so we do not quote a flow figure here. Send us your application details and we will confirm the flow and datasheet figures against your requirement before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC family as curves rather than as a single rated figure, so we do not state a flow number here. Tell us your application and required air demand, and we will confirm the flow and datasheet figures for this 600-size, 1 in port unit on request before you order.
The W code in GC60025AF2WG selects the 5 um filtering element instead of the 40 um series standard, for finer particulate removal, and the A code selects the automatic drain, which discharges condensate from the aluminium alloy bowl without manual intervention. Manual and differential-pressure drains, and the 40 um element, remain available as options if you prefer them.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.