The AirTAC GC60025AF2WGK AirTAC F.R.L. Combination, G1 (1 in) Port is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC60025AF2WGK is an AirTAC GC series three-unit F.R.L. combination: a separate filter, regulator and lubricator assembled into one complete air-treatment set. This configuration is size 600 with a G1 (1 in) port in G thread, 5 um filtration (W grade), an automatic drain on the filter bowl, a standard regulator adjustable from 0.15-0.9 MPa (20-130 psi), an embedded square gauge with psi scale, and a reverse/check valve fitted. At size 600 the filter bowl is aluminium alloy. Maximum working (inlet) pressure is 1.0 MPa (145 psi) and the operating temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC combination is available in sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um standard or 5 um (W) filtration, square or round gauges with MPa, psi or bar scales, and PT (standard), G or NPT threads. Flow is published as curves rather than a single rating, so we confirm datasheet and flow figures for your application on request.
| Model | GC60025AF2WGK AirTAC F.R.L. Combination, G1 (1 in) Port |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
Feeds spray booths and air-powered applicators on a vehicle finishing line, where water and 5 um-grade particulate removal, stable regulated pressure and oil-mist lubrication are all needed from one supply point.
Supplies the pneumatic cylinders and grippers that move, clamp and divert packs along a conveyor line, keeping the air dry, filtered, regulated and lubricated for continuous shift running.
Serves a workshop drop feeding impact wrenches, air ratchets and clamping fixtures, combining filtration, regulation and lubrication at the point where the tool circuit branches off the main line.
Size and port are the first choice: step up from 200 to 600 (1/8 in to 1 in ports) as your air demand grows, matching the port to your supply line. For this set, drain type matters: automatic drain suits unattended installations, manual drain suits supervised points, and the differential-pressure default drains only when the pressure drop calls for it. Filter grade is 40 um standard or 5 um (W) where finer particulate protection is wanted - this unit carries the 5 um grade. Gauge scale is selectable as MPa, psi or bar, and thread is PT as standard with G (BSPP) and NPT as order options; a bracket is included.
Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Tell us your application and we will confirm the flow and datasheet figures for this size 600, G1 (1 in) unit on request before you order.
No. This unit carries a G (BSPP) parallel thread on its 1 in port. PT is the standard thread for the GC series, and G and NPT are catalogue options you select when ordering - this model is specified with G. State your piping thread when ordering so the set matches your installation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.