The AirTAC GC60025AF2WK AirTAC F.R.L. Unit 1 in PT, 5 um Filter is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has PT1" ports, a 5 µm element, a automatic drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC60025AF2WK is a three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one air-preparation set. This size-600 configuration has 1 inch PT ports, a 5 um filter element (code W), an automatic drain on the filter bowl, a standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range, an embedded square gauge scaled in psi, a reverse/check valve, and a mounting bracket. The aluminium alloy bowls at this size give added mechanical strength where larger polycarbonate bowls would be a concern.
This is a genuine AirTAC part from the GC series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, filter grades of 40 um standard or 5 um optional, automatic, manual or differential-pressure drains, and gauge scales in MPa, psi or bar. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GC60025AF2WK AirTAC F.R.L. Unit 1 in PT, 5 um Filter |
|---|---|
| Series | GC600 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | PT1" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Automatic drain |
| Bowl material | Aluminium alloy |
| Pressure gauge | Fitted — square, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC600 | G-series F.R.L. combination, 600 body — sets the port range. |
|---|---|
| 25 | Port size PT1". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF600-25 filter, GR600-25 regulator and GL600-25 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC600 · PT1" · 5 µm |
|---|---|
| One size down | GC400 |
| Two-unit equivalent | GFC600-25 |
| Build order | Filter → regulator → lubricator |
A 1 inch F.R.L. set at the take-off point of a plant air ring main, cleaning and regulating the supply before it feeds assembly stations, with the automatic drain keeping the filter bowl clear on a line that runs across shifts.
Conditioning the air that drives conveyor diverters, filler cylinders and case-packing clamps, where the 5 um element protects close-fitting valve spools and the lubricator carries a fine oil mist to the cylinders.
A main air-preparation point on a large machining centre or press, where the check valve holds the downstream circuit against supply backflow and the psi-scaled square gauge gives operators a familiar local pressure readout.
Size 600 with 1 inch PT ports is the largest step in the GC range; step down to 400, 300 or 200 if your line flow is modest, since port and body size should follow the air demand of the machine. The 5 um element (W) suits downstream equipment that needs finer particulate removal than the 40 um standard; the automatic drain empties the filter bowl without operator attention, which matters where the unit sits in an inaccessible position or on a continuously running line. The square gauge here reads in psi; MPa and bar scales are available as alternatives, and an external round gauge is optional. Thread is PT as standard, with G (BSPP) and NPT as orderable options, and the bracket is included.
Because catalogue flow is published only as curves and not as a single rated figure, we do not quote a flow number here. Send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The aluminium-alloy bowls on the GC600 suit harsher environments than PC bowls. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR600-25 regulator with a GF600-25 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the datasheet flow curves against your air demand before you order.
The A in the code GC60025AF2WK specifies an automatic drain, which discharges collected condensate from the filter bowl without manual attention. The GC series is also available with a manual drain or the differential-pressure default drain, and the filter grade can be the 40 um standard instead of the 5 um element fitted here.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.